(B)Open the original cover and rotate the roller rotating knob to remove the misfed original from the exit area. If the misfed original cannot be easily removed, proceed to (C).
Roller
(C)If the original does not move easily into the exit area, remove it in the direction of the arrow while rotating the knob.
A number may appear in the display after a minus sign, indicating the number of the originals that must be returned to the original feeder tray. Open and close the SPF to clear the SPF misfeed ( 
) indicator and then clear the misfeed and return the required number of originals. Then press the start (
) key to resume copying.
DEVELOPER REQUIRED
When the developer replacement required ( 
) indicator lights up, the developer should be replaced. DEVELOPER REPLACEMENT SHOULD ONLY BE DONE BY AN AUTORIZED SHARP SERVICE TECHNICIAN. Contact your service centre as soon as possible.
MAINTENANCE REQUIRED
When maintenance ( 
) indicator lights up, service by an authorised SHARP service technician is required. Contact your service centre as soon as possible.
56