INSTALLING THE SOFTWARE
•In the following explanations it is assumed that the mouse is
configured for right hand operation.
• The scanner function only works when using a USB cable.
•If an error message appears, follow the instructions on the screen to solve the problem. After the problem is solved, the installation procedure will continue. Depending on the problem, you may have to click the "Cancel" button to exit the installer. In this case, reinstall the software from the beginning after solving the problem.
Using the machine with a USB connection
1 The USB cable must not be connected to the machine. Make sure that the cable is not connected before proceeding.
If the cable is connected, a Plug and Play window will appear. If this happens, click the "Cancel" button to close the window and disconnect the cable.
The cable will be connected in step 13.
2
3
4
5
Insert the
Click the "start" button, click "My Computer" ( 
), and then 
).
• On Windows Vista, click the "Start" button, click "Computer" and then
•On Windows 98/Me/2000,
Double-click the "setup" icon ( 
).
On Windows Vista, if a message screen appears asking you for confirmation, click "Allow".
The "SOFTWARE LICENSE" window will appear. Make sure that you understand the contents of the software license, and then click the "Yes" button.
You can show the "SOFTWARE LICENSE" in a different language by selecting the desired language from the language menu. To install the software in the selected language, continue the installation with that language selected.
6 Read the "Readme First" in the "Welcome" window and then click the "Next" button.
22