Sharp AL-2020 Important points when selecting an installation site, Supply and Consumables

Page 3

CAUTIONS

Caution label on the unit

The label ( , ) in the fusing area of the unit indicates the following:

: Caution, risk of danger

: Caution, hot surface

Cautions on using

Follow the cautions below when using this unit.

Warning:

•The fusing area is hot. Exercise care in this area when removing misfed paper.

•Do not look directly at the light source. Doing so may damage your eyes.

•Unit power must be turned off before installing any supplies.

Caution:

•Place the unit on a firm, level surface.

•Do not install the unit in a humid or dusty location.

•When the unit is not used for a long time, for example during prolonged holidays, turn the power switch off and remove the power cord from the outlet.

•When moving the unit, be sure to turn the power switch off and remove the power cord from the outlet.

•Do not switch the unit rapidly on and off. After turning the unit off, wait 10 to 15 seconds before turning it back on.

•Do not cover the unit with a dust cover, cloth or plastic film while the power is on. Doing so may prevent heat radiation, damaging the unit.

•Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

•The socket-outlet shall be installed near the unit and shall be easily accessible.

Important points when selecting an installation site

Do not install your unit in areas that are:

 

 

 

•

damp, humid, or very dusty

•

subject to extreme temperature or

•

exposed to direct sunlight

 

humidity changes, e.g., near an air

•

poorly ventilated

 

conditioner or heater.

 

Be sure to allow the required space around the

20 cm

 

machine for servicing and proper ventilation.

 

 

 

 

 

 

 

10 cm

10 cm

Cautions on handling

Be careful in handling the unit as follows to maintain the performance of this unit.

Do not drop the unit, subject it to shock or strike it against any object. Do not expose the drum cartridge to direct sunlight.

•Doing so will damage the surface (green portion) of the drum cartridge, causing smudges on copies.

Store spare supplies such as drum cartridges and TD cartridges in a dark place without removing from the package before use.

•If they are exposed to direct sunlight, smudges on copies may result.

Do not touch the surface (green portion) of the drum cartridge.

•Doing so will damage the surface of the cartridge, causing smudges on copies.

Supply and Consumables

The supply of spare parts for a repair of the appliance is guaranteed for at least 7 years following the termination of production. Spare parts are those parts of the apparatus which may break down within the scope of ordinary use of the product - whereas those parts which normally exceed the life of the product are not considered spare parts. Consumables also, are available for 7 years following the termination of production.

1

Page 2 Page 4
Image 3
Page 2 Page 4
Contents AL-2020 AL-2040 Bank drafts Be sure to allow the required space around Important points when selecting an installation siteDo not install your unit in areas that are Supply and ConsumablesSoftware License Trademark acknowledgementsLaser information Contents Using the Manuals Online manualConventions used in this manual and online manual SPF AL-2040 Part NamesOperation Panel Original to copy key and indicatorsSetup Procedure Setting UP the UnitPreparing the Unit for Installation Checking Packed Components and AccessoriesLockUnlock AL-2020 AL-2040 Release the scan head locking switchGently insert the TD cartridge Installing the TD CartridgePage Connecting the Power Cord Power off methods Initial settings of operation panelAbout the scan head Paper Type of paper Type of media Size Weight FeedingLoading the Paper Tray Gently push the paper tray back into the unit Open the multi-bypass tray and extend the tray Multi-bypass trayPaper must be fed narrow side into the feed slot Press the tray select key to select the multi-bypass trayButton Manager SoftwareMFP driver Sharpdesk2000/XP/Vista Before InstallationInstallation environment and usable software Hardware and software requirementsUsing the machine with a USB connection Installing the SoftwareClick the MFP Driver button Select Connected to this Computer and clickAL-2020 AL-2040 This completes the installation of the software When installing is finished, click the Close buttonConnecting a USB cable Using the machine as a network printer AL-2040 onlyInsert the LAN cable into the LAN connector on the machine Set the IP Address Enter the IP address, subnet mask, and default gateway LPR TCP/IP direct printingClick the Printer Driver button Page Using the machine as a shared printer Click the Printer Driver button You will return to the window of . Click the Close button Sharing the printer using windows networking AL-2040This completes the installation of the software Power save indicator Indicators on the Operation PanelStart indicator Online indicatorUsing the Printer Mode Opening the printer driver from the start menuClick Printing Preferences button in the General tab How to print Using the Scanner Mode Using the Button ManagerSetting up the Button Manager Windows XP/Vista Windows 98/Me/2000 Select Sharp AL-xxxx, and click the Properties buttonProperties screen, click Events tab Scan Button Destination Setting Dialog Box Flow of the Button Manager setting Scanner Event Application Application launched Number Using the Scan key to begin scanningPress the Scan key Press the right copy quantityPress the start Key Opening the scanner driver and scanning from your computerScan is started Scanning with the Scanner and Camera Wizard in Windows XP Select a name, format, and folder for the scanned imageClick Finish in the screen that appears HOW to USE the Online Manual Start copying Select the copy settingsCopy Flow Place the originalOriginal Placement Using the document glassAbout interrupt copying Document feeder tray Using the SPF AL-2040SET the Copy Quantity Exposure ADJUSTMENT/PHOTO CopyingExposure adjustment Photo modeAutomatic exposure adjustment Press the tray select key REDUCTION/ENLARGEMENT/ZOOMSelecting the Paper Tray Set the reduction/enlargement ratioTWO Sided Copying Special FunctionsUsing the document glass Press the start key When copying in a one-sided to two-sided modeDescription of Other Special Functions Toner Save ModeUser Programs Setting the user programsExample Total number of copies is 1,234 Press the light key to return to the normal copy modeProgram Mode Parameters Displaying Total Number of CopiesLock release button TD Cartridge ReplacementGently pull the TD cartridge out While pressing the lock release ButtonDrum Cartridge Replacement Gently pull the cartridge out. DisposeOld drum cartridge Accordance with local regulations Page Cleaning the Unit CabinetDocument glass and the back side of the SPF Transfer charger Troubleshooting Troubleshooting the UnitIndication Cause and remedy Status IndicatorsMisfeed Removal Misfeed in the paper feed area Misfeed in the fusing area Lower the fusing unit releaseLever Rotate the roller rotating Knob in the direction Lower the fusing unit release leverMisfeed in the transport area Open the front coverMisfeed in the SPF AL-2040 Press the copy ratio display % key Appendix SpecificationsAL-2020 AL-2040 Bit depth USB interface cable About Supplies and OptionsSupply list Interface cableStore the supplies in a location that is Moving and Storing the UnitMoving instructions Proper storageMaterial Safety Data Sheet Hazards Identification Exposure Controls / Personal Protection Ecological Information Msds No. F-31231 2/4 Toner Date Revised Mar Date Issued Sep Msds No. F-31231 Index Drum replacement required IndicatorMFP driver Index by Purpose Other Countries outside the EU Class Laser Product Laser Klasse Sharp Manufacturing France S.A AL-2020/AL-2040v1
Related manuals
Manual 42 pages 53.03 Kb

AL-2040, AL-2020 specifications

The Sharp AL-2020 and AL-2040 are compact, multifunctional black-and-white copiers designed for small to mid-sized office environments. Known for their versatility and reliability, these models have become popular choices for businesses looking to enhance efficiency and output quality.

One of the standout features of both the AL-2020 and AL-2040 is their impressive printing and copying speed. The AL-2020 offers a speed of up to 20 pages per minute, while the AL-2040 enhances this capability with a speed of up to 40 pages per minute, catering to higher volume environments. This efficiency helps reduce wait times, allowing users to focus on other important tasks.

Both models are equipped with a user-friendly control panel that makes navigation easy. The LCD display provides clear visibility of settings, making it simple for users to adjust configurations and monitor the copier's status. Additionally, the AL-2040 features advanced finishing options, allowing users to execute tasks such as double-sided printing and stapling with ease, enhancing its utility within any office setting.

The Sharp AL-2020 and AL-2040 also incorporate advanced technologies that ensure outstanding print quality. With a resolution of 600 x 600 dpi, users can expect sharp text and detailed graphics, making these machines suitable for professional documents, presentations, and reports.

Another significant characteristic of these copiers is their environmental consideration. Both models feature low-energy consumption during operation and standby modes, contributing to a greener office environment. Sharp has also integrated long-life consumables into these models, which not only reduce waste but also lower the total cost of ownership.

Moreover, the AL-2040 comes with network printing capabilities, allowing multiple users within a network to share the device seamlessly. This feature is particularly beneficial in collaborative office settings where shared resources are essential.

Lastly, ease of maintenance is a key characteristic of the Sharp AL-2020 and AL-2040. Designed for straightforward servicing, these copiers minimize downtime and ensure smooth operation, making them reliable partners for any business looking to streamline its document management processes. With competitive features and robust performance, the Sharp AL-2020 and AL-2040 stand out as reliable solutions for modern office needs.
Top Page Image Contents