Sharp AL-2020 operation manual Using the SPF AL-2040, Document feeder tray

Page 50

Using the SPF (AL-2040)

The SPF is designed to hold up to 50 originals measuring from A5 to A4 and weighting from 56g/m2 to 90g/m2.

Before feeding originals in the document feeder tray, be sure to

remove any staples or paper clips from them.

Before placing curled or wavy originals into the document feeder tray, be sure to flatten them. If not, original misfeeds may result.

If the original is placed correctly in the SPF, the SPF indicator will light up. If the original is not placed correctly, the SPF indicator will not light. If the SPF is not closed correctly, the indicator will blink.

Badly damaged originals may misfeed in the SPF. It is recommended that such originals be copied from the document glass.

Special originals such as transparency film should not be fed through the SPF, but should be placed directly on the document glass.

Image loss (max. 4mm) can occur at the leading and trailing edges of the copies. Also image loss (max. 4.5mm in total) can occur along the other edges of the copies. It can be 6mm (max.) at the trailing edge of the second copy of two-sided copying.

To stop continuous copying using the SPF, press the clear key.

Copying using one-sided to one-sided mode:

Ensure that no indicator is lit among the original to copy indicators.

1

2

Make sure that no original is left on the document glass.

Adjust the original guides to the size of originals.

3

Set the originals face up in the

Original face up

 

document feeder tray.

Peep hole

 

Use the peep hole (see the illustration at

 

 

 

right) to check the position of the original.

 

 

There is an original top edge mark in the

 

 

peep hole. Align the top edge of the

 

 

original with this mark.

 

48

Image 50
Contents AL-2020 AL-2040 Bank drafts Supply and Consumables Important points when selecting an installation siteDo not install your unit in areas that are Be sure to allow the required space aroundLaser information Software LicenseTrademark acknowledgements Contents Conventions used in this manual and online manual Using the ManualsOnline manual Part Names SPF AL-2040Original to copy key and indicators Operation PanelSetting UP the Unit Setup ProcedureChecking Packed Components and Accessories Preparing the Unit for InstallationAL-2020 AL-2040 Release the scan head locking switch LockUnlockInstalling the TD Cartridge Gently insert the TD cartridgePage Connecting the Power Cord About the scan head Power off methodsInitial settings of operation panel Type of paper Type of media Size Weight Feeding PaperLoading the Paper Tray Gently push the paper tray back into the unit Multi-bypass tray Open the multi-bypass tray and extend the trayPress the tray select key to select the multi-bypass tray Paper must be fed narrow side into the feed slotSharpdesk SoftwareMFP driver Button ManagerHardware and software requirements Before InstallationInstallation environment and usable software 2000/XP/VistaInstalling the Software Using the machine with a USB connectionClick the MFP Driver button AL-2020 AL-2040 Select Connected to thisComputer and click When installing is finished, click the Close button This completes the installation of the softwareInsert the LAN cable into the LAN connector on the machine Connecting a USB cableUsing the machine as a network printer AL-2040 only Set the IP Address Click the Printer Driver button Enter the IP address, subnet mask, and default gatewayLPR TCP/IP direct printing Page Using the machine as a shared printer Click the Printer Driver button Sharing the printer using windows networking AL-2040 You will return to the window of . Click the Close buttonThis completes the installation of the software Online indicator Indicators on the Operation PanelStart indicator Power save indicatorClick Printing Preferences button in the General tab Using the Printer ModeOpening the printer driver from the start menu How to print Setting up the Button Manager Windows XP/Vista Using the Scanner ModeUsing the Button Manager Properties screen, click Events tab Windows 98/Me/2000Select Sharp AL-xxxx, and click the Properties button Scan Button Destination Setting Dialog Box Flow of the Button Manager setting Scanner Event Press the right copy quantity Using the Scan key to begin scanningPress the Scan key Application Application launched NumberOpening the scanner driver and scanning from your computer Press the start KeyScan is started Click Finish in the screen that appears Scanning with the Scanner and Camera Wizard in Windows XPSelect a name, format, and folder for the scanned image HOW to USE the Online Manual Place the original Select the copy settingsCopy Flow Start copyingAbout interrupt copying Original PlacementUsing the document glass Using the SPF AL-2040 Document feeder trayPhoto mode Exposure ADJUSTMENT/PHOTO CopyingExposure adjustment SET the Copy QuantityAutomatic exposure adjustment Set the reduction/enlargement ratio REDUCTION/ENLARGEMENT/ZOOMSelecting the Paper Tray Press the tray select keySpecial Functions TWO Sided CopyingWhen copying in a one-sided to two-sided mode Using the document glass Press the start keyToner Save Mode Description of Other Special FunctionsSetting the user programs User ProgramsDisplaying Total Number of Copies Press the light key to return to the normal copy modeProgram Mode Parameters Example Total number of copies is 1,234While pressing the lock release Button TD Cartridge ReplacementGently pull the TD cartridge out Lock release buttonOld drum cartridge Accordance with local regulations Drum Cartridge ReplacementGently pull the cartridge out. Dispose Page Document glass and the back side of the SPF Cleaning the UnitCabinet Transfer charger Troubleshooting the Unit TroubleshootingStatus Indicators Indication Cause and remedyMisfeed Removal Misfeed in the paper feed area Lever Misfeed in the fusing areaLower the fusing unit release Open the front cover Lower the fusing unit release leverMisfeed in the transport area Rotate the roller rotating Knob in the directionMisfeed in the SPF AL-2040 Press the copy ratio display % key Specifications AppendixAL-2020 AL-2040 Bit depth Interface cable About Supplies and OptionsSupply list USB interface cableProper storage Moving and Storing the UnitMoving instructions Store the supplies in a location that isMaterial Safety Data Sheet Hazards Identification Exposure Controls / Personal Protection Ecological Information Msds No. F-31231 2/4 Toner Date Revised Mar Date Issued Sep Msds No. F-31231 Drum replacement required Indicator IndexMFP driver Index by Purpose Other Countries outside the EU Class Laser Product Laser Klasse Sharp Manufacturing France S.A AL-2020/AL-2040v1
Related manuals
Manual 42 pages 53.03 Kb

AL-2040, AL-2020 specifications

The Sharp AL-2020 and AL-2040 are compact, multifunctional black-and-white copiers designed for small to mid-sized office environments. Known for their versatility and reliability, these models have become popular choices for businesses looking to enhance efficiency and output quality.

One of the standout features of both the AL-2020 and AL-2040 is their impressive printing and copying speed. The AL-2020 offers a speed of up to 20 pages per minute, while the AL-2040 enhances this capability with a speed of up to 40 pages per minute, catering to higher volume environments. This efficiency helps reduce wait times, allowing users to focus on other important tasks.

Both models are equipped with a user-friendly control panel that makes navigation easy. The LCD display provides clear visibility of settings, making it simple for users to adjust configurations and monitor the copier's status. Additionally, the AL-2040 features advanced finishing options, allowing users to execute tasks such as double-sided printing and stapling with ease, enhancing its utility within any office setting.

The Sharp AL-2020 and AL-2040 also incorporate advanced technologies that ensure outstanding print quality. With a resolution of 600 x 600 dpi, users can expect sharp text and detailed graphics, making these machines suitable for professional documents, presentations, and reports.

Another significant characteristic of these copiers is their environmental consideration. Both models feature low-energy consumption during operation and standby modes, contributing to a greener office environment. Sharp has also integrated long-life consumables into these models, which not only reduce waste but also lower the total cost of ownership.

Moreover, the AL-2040 comes with network printing capabilities, allowing multiple users within a network to share the device seamlessly. This feature is particularly beneficial in collaborative office settings where shared resources are essential.

Lastly, ease of maintenance is a key characteristic of the Sharp AL-2020 and AL-2040. Designed for straightforward servicing, these copiers minimize downtime and ensure smooth operation, making them reliable partners for any business looking to streamline its document management processes. With competitive features and robust performance, the Sharp AL-2020 and AL-2040 stand out as reliable solutions for modern office needs.