Sharp AL-2040, AL-2020 operation manual Automatic exposure adjustment

Page 52

Automatic exposure adjustment

This automatic exposure level will remain in effect until you change it again by this procedure.

The automatic exposure level can be adjusted to suit your copying needs. This level is set for copying from the document glass and copying from the SPF respectively.

1 When adjusting the automatic exposure level for copying from

the SPF, place an original in the document feeder tray and make sure that the SPF indicator lights up. When adjusting the level for copying from the document glass, make sure that no original is left in the document feeder tray.

2

3

Press the exposure mode selector key to select the PHOTO () mode.

Press and hold down the exposure mode selector key for approximately 5 seconds. The PHOTO ( ) indicator will go out and the AUTO indicator will begin to blink. One or two light and dark indicators corresponding to the automatic exposure level which has been selected will light up.

4

Press the light ( ) or dark ( ) key to

 

lighten or darken the automatic exposure

 

level as desired. If exposure level 2 is

 

selected, the two left-handmost indicators

 

for that level will light up simultaneously.

 

Also, if level 4 is selected, the two right-

 

handmost indicators for that level will

 

light up simultaneously.

5

Press the exposure selector key. The AUTO indicator will stop

 

blinking and light up steadily.

50

Page 51 Page 53
Image 52
Page 51 Page 53
Contents AL-2020 AL-2040 Bank drafts Important points when selecting an installation site Do not install your unit in areas that areSupply and Consumables Be sure to allow the required space aroundTrademark acknowledgements Software LicenseLaser information Contents Online manual Using the ManualsConventions used in this manual and online manual Part Names SPF AL-2040Original to copy key and indicators Operation PanelSetting UP the Unit Setup ProcedureChecking Packed Components and Accessories Preparing the Unit for InstallationAL-2020 AL-2040 Release the scan head locking switch LockUnlockInstalling the TD Cartridge Gently insert the TD cartridgePage Connecting the Power Cord Initial settings of operation panel Power off methodsAbout the scan head Type of paper Type of media Size Weight Feeding PaperLoading the Paper Tray Gently push the paper tray back into the unit Multi-bypass tray Open the multi-bypass tray and extend the trayPress the tray select key to select the multi-bypass tray Paper must be fed narrow side into the feed slotSoftware MFP driverSharpdesk Button ManagerBefore Installation Installation environment and usable softwareHardware and software requirements 2000/XP/VistaInstalling the Software Using the machine with a USB connectionClick the MFP Driver button Computer and click Select Connected to thisAL-2020 AL-2040 When installing is finished, click the Close button This completes the installation of the softwareUsing the machine as a network printer AL-2040 only Connecting a USB cableInsert the LAN cable into the LAN connector on the machine Set the IP Address LPR TCP/IP direct printing Enter the IP address, subnet mask, and default gatewayClick the Printer Driver button Page Using the machine as a shared printer Click the Printer Driver button Sharing the printer using windows networking AL-2040 You will return to the window of . Click the Close buttonThis completes the installation of the software Indicators on the Operation Panel Start indicatorOnline indicator Power save indicatorOpening the printer driver from the start menu Using the Printer ModeClick Printing Preferences button in the General tab How to print Using the Button Manager Using the Scanner ModeSetting up the Button Manager Windows XP/Vista Select Sharp AL-xxxx, and click the Properties button Windows 98/Me/2000Properties screen, click Events tab Scan Button Destination Setting Dialog Box Flow of the Button Manager setting Scanner Event Using the Scan key to begin scanning Press the Scan keyPress the right copy quantity Application Application launched NumberOpening the scanner driver and scanning from your computer Press the start KeyScan is started Select a name, format, and folder for the scanned image Scanning with the Scanner and Camera Wizard in Windows XPClick Finish in the screen that appears HOW to USE the Online Manual Select the copy settings Copy FlowPlace the original Start copyingUsing the document glass Original PlacementAbout interrupt copying Using the SPF AL-2040 Document feeder trayExposure ADJUSTMENT/PHOTO Copying Exposure adjustmentPhoto mode SET the Copy QuantityAutomatic exposure adjustment REDUCTION/ENLARGEMENT/ZOOM Selecting the Paper TraySet the reduction/enlargement ratio Press the tray select keySpecial Functions TWO Sided CopyingWhen copying in a one-sided to two-sided mode Using the document glass Press the start keyToner Save Mode Description of Other Special FunctionsSetting the user programs User ProgramsPress the light key to return to the normal copy mode Program Mode ParametersDisplaying Total Number of Copies Example Total number of copies is 1,234TD Cartridge Replacement Gently pull the TD cartridge outWhile pressing the lock release Button Lock release buttonGently pull the cartridge out. Dispose Drum Cartridge ReplacementOld drum cartridge Accordance with local regulations Page Cabinet Cleaning the UnitDocument glass and the back side of the SPF Transfer charger Troubleshooting the Unit TroubleshootingStatus Indicators Indication Cause and remedyMisfeed Removal Misfeed in the paper feed area Lower the fusing unit release Misfeed in the fusing areaLever Lower the fusing unit release lever Misfeed in the transport areaOpen the front cover Rotate the roller rotating Knob in the directionMisfeed in the SPF AL-2040 Press the copy ratio display % key Specifications AppendixAL-2020 AL-2040 Bit depth About Supplies and Options Supply listInterface cable USB interface cableMoving and Storing the Unit Moving instructionsProper storage Store the supplies in a location that isMaterial Safety Data Sheet Hazards Identification Exposure Controls / Personal Protection Ecological Information Msds No. F-31231 2/4 Toner Date Revised Mar Date Issued Sep Msds No. F-31231 Drum replacement required Indicator IndexMFP driver Index by Purpose Other Countries outside the EU Class Laser Product Laser Klasse Sharp Manufacturing France S.A AL-2020/AL-2040v1
Related manuals
Manual 42 pages 53.03 Kb

AL-2040, AL-2020 specifications

The Sharp AL-2020 and AL-2040 are compact, multifunctional black-and-white copiers designed for small to mid-sized office environments. Known for their versatility and reliability, these models have become popular choices for businesses looking to enhance efficiency and output quality.

One of the standout features of both the AL-2020 and AL-2040 is their impressive printing and copying speed. The AL-2020 offers a speed of up to 20 pages per minute, while the AL-2040 enhances this capability with a speed of up to 40 pages per minute, catering to higher volume environments. This efficiency helps reduce wait times, allowing users to focus on other important tasks.

Both models are equipped with a user-friendly control panel that makes navigation easy. The LCD display provides clear visibility of settings, making it simple for users to adjust configurations and monitor the copier's status. Additionally, the AL-2040 features advanced finishing options, allowing users to execute tasks such as double-sided printing and stapling with ease, enhancing its utility within any office setting.

The Sharp AL-2020 and AL-2040 also incorporate advanced technologies that ensure outstanding print quality. With a resolution of 600 x 600 dpi, users can expect sharp text and detailed graphics, making these machines suitable for professional documents, presentations, and reports.

Another significant characteristic of these copiers is their environmental consideration. Both models feature low-energy consumption during operation and standby modes, contributing to a greener office environment. Sharp has also integrated long-life consumables into these models, which not only reduce waste but also lower the total cost of ownership.

Moreover, the AL-2040 comes with network printing capabilities, allowing multiple users within a network to share the device seamlessly. This feature is particularly beneficial in collaborative office settings where shared resources are essential.

Lastly, ease of maintenance is a key characteristic of the Sharp AL-2020 and AL-2040. Designed for straightforward servicing, these copiers minimize downtime and ensure smooth operation, making them reliable partners for any business looking to streamline its document management processes. With competitive features and robust performance, the Sharp AL-2020 and AL-2040 stand out as reliable solutions for modern office needs.
Top Page Image Contents