Sharp AL-2020, AL-2040 operation manual Setting UP the Unit, Setup Procedure

Page 9

2

SETTING UP THE UNIT

 

Follow the installation procedure below to use the unit properly.

If the unit does not function properly during setup or use, or if a function cannot be used, see "TROUBLESHOOTING THE UNIT" (p.62).

 

2

 

SETUP PROCEDURE

When using the unit for the first time, setup the unit following the procedure shown below.

1Open the package, and make sure that all the accessories are supplied with the unit. (p.8)

2Remove the protective materials. (p.9)

3Install the TD cartridge. (p.10)

4Load the paper in the paper tray (p.15) or the multi-bypass tray . (p.17)

5Plug the other end of the power cord into the nearest outlet. (p.12)

6Install the software.* (p.19)

7Connect the interface cable* (p.25) and turn on the unit. (p.12)

8Now, you can copy (p.46), print (p.35) or scan (p.36) your document.

*If you are only using the unit for copying, skip this step.

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents AL-2020 AL-2040 Bank drafts Do not install your unit in areas that are Important points when selecting an installation siteSupply and Consumables Be sure to allow the required space aroundSoftware License Trademark acknowledgementsLaser information Contents Using the Manuals Online manualConventions used in this manual and online manual SPF AL-2040 Part NamesOperation Panel Original to copy key and indicatorsSetup Procedure Setting UP the UnitPreparing the Unit for Installation Checking Packed Components and AccessoriesLockUnlock AL-2020 AL-2040 Release the scan head locking switchGently insert the TD cartridge Installing the TD CartridgePage Connecting the Power Cord Power off methods Initial settings of operation panelAbout the scan head Paper Type of paper Type of media Size Weight FeedingLoading the Paper Tray Gently push the paper tray back into the unit Open the multi-bypass tray and extend the tray Multi-bypass trayPaper must be fed narrow side into the feed slot Press the tray select key to select the multi-bypass trayMFP driver SoftwareSharpdesk Button ManagerInstallation environment and usable software Before InstallationHardware and software requirements 2000/XP/VistaUsing the machine with a USB connection Installing the SoftwareClick the MFP Driver button Select Connected to this Computer and clickAL-2020 AL-2040 This completes the installation of the software When installing is finished, click the Close buttonConnecting a USB cable Using the machine as a network printer AL-2040 onlyInsert the LAN cable into the LAN connector on the machine Set the IP Address Enter the IP address, subnet mask, and default gateway LPR TCP/IP direct printingClick the Printer Driver button Page Using the machine as a shared printer Click the Printer Driver button You will return to the window of . Click the Close button Sharing the printer using windows networking AL-2040This completes the installation of the software Start indicator Indicators on the Operation PanelOnline indicator Power save indicatorUsing the Printer Mode Opening the printer driver from the start menuClick Printing Preferences button in the General tab How to print Using the Scanner Mode Using the Button ManagerSetting up the Button Manager Windows XP/Vista Windows 98/Me/2000 Select Sharp AL-xxxx, and click the Properties buttonProperties screen, click Events tab Scan Button Destination Setting Dialog Box Flow of the Button Manager setting Scanner Event Press the Scan key Using the Scan key to begin scanningPress the right copy quantity Application Application launched NumberPress the start Key Opening the scanner driver and scanning from your computerScan is started Scanning with the Scanner and Camera Wizard in Windows XP Select a name, format, and folder for the scanned imageClick Finish in the screen that appears HOW to USE the Online Manual Copy Flow Select the copy settingsPlace the original Start copyingOriginal Placement Using the document glassAbout interrupt copying Document feeder tray Using the SPF AL-2040Exposure adjustment Exposure ADJUSTMENT/PHOTO CopyingPhoto mode SET the Copy QuantityAutomatic exposure adjustment Selecting the Paper Tray REDUCTION/ENLARGEMENT/ZOOMSet the reduction/enlargement ratio Press the tray select keyTWO Sided Copying Special FunctionsUsing the document glass Press the start key When copying in a one-sided to two-sided modeDescription of Other Special Functions Toner Save ModeUser Programs Setting the user programsProgram Mode Parameters Press the light key to return to the normal copy modeDisplaying Total Number of Copies Example Total number of copies is 1,234Gently pull the TD cartridge out TD Cartridge ReplacementWhile pressing the lock release Button Lock release buttonDrum Cartridge Replacement Gently pull the cartridge out. DisposeOld drum cartridge Accordance with local regulations Page Cleaning the Unit CabinetDocument glass and the back side of the SPF Transfer charger Troubleshooting Troubleshooting the UnitIndication Cause and remedy Status IndicatorsMisfeed Removal Misfeed in the paper feed area Misfeed in the fusing area Lower the fusing unit releaseLever Misfeed in the transport area Lower the fusing unit release leverOpen the front cover Rotate the roller rotating Knob in the directionMisfeed in the SPF AL-2040 Press the copy ratio display % key Appendix SpecificationsAL-2020 AL-2040 Bit depth Supply list About Supplies and OptionsInterface cable USB interface cableMoving instructions Moving and Storing the UnitProper storage Store the supplies in a location that isMaterial Safety Data Sheet Hazards Identification Exposure Controls / Personal Protection Ecological Information Msds No. F-31231 2/4 Toner Date Revised Mar Date Issued Sep Msds No. F-31231 Index Drum replacement required IndicatorMFP driver Index by Purpose Other Countries outside the EU Class Laser Product Laser Klasse Sharp Manufacturing France S.A AL-2020/AL-2040v1
Related manuals
Manual 42 pages 53.03 Kb

AL-2040, AL-2020 specifications

The Sharp AL-2020 and AL-2040 are compact, multifunctional black-and-white copiers designed for small to mid-sized office environments. Known for their versatility and reliability, these models have become popular choices for businesses looking to enhance efficiency and output quality.

One of the standout features of both the AL-2020 and AL-2040 is their impressive printing and copying speed. The AL-2020 offers a speed of up to 20 pages per minute, while the AL-2040 enhances this capability with a speed of up to 40 pages per minute, catering to higher volume environments. This efficiency helps reduce wait times, allowing users to focus on other important tasks.

Both models are equipped with a user-friendly control panel that makes navigation easy. The LCD display provides clear visibility of settings, making it simple for users to adjust configurations and monitor the copier's status. Additionally, the AL-2040 features advanced finishing options, allowing users to execute tasks such as double-sided printing and stapling with ease, enhancing its utility within any office setting.

The Sharp AL-2020 and AL-2040 also incorporate advanced technologies that ensure outstanding print quality. With a resolution of 600 x 600 dpi, users can expect sharp text and detailed graphics, making these machines suitable for professional documents, presentations, and reports.

Another significant characteristic of these copiers is their environmental consideration. Both models feature low-energy consumption during operation and standby modes, contributing to a greener office environment. Sharp has also integrated long-life consumables into these models, which not only reduce waste but also lower the total cost of ownership.

Moreover, the AL-2040 comes with network printing capabilities, allowing multiple users within a network to share the device seamlessly. This feature is particularly beneficial in collaborative office settings where shared resources are essential.

Lastly, ease of maintenance is a key characteristic of the Sharp AL-2020 and AL-2040. Designed for straightforward servicing, these copiers minimize downtime and ensure smooth operation, making them reliable partners for any business looking to streamline its document management processes. With competitive features and robust performance, the Sharp AL-2020 and AL-2040 stand out as reliable solutions for modern office needs.
Top Page Image Contents