Sharp AL-1552, AL-1555, AL-1553 Using the Scanner key to begin scanning, Press the Scanner key

Using the SCANNER key to begin scanning

•Scanning is not possible during a copy job.

• If the SCANNER ( ) key is pressed during a print job, the scan job will be stored.

•When scanning an original that has been placed in the SPF/RSPF, only one original can be placed unless you are using Sharpdesk.

1

2

3

Press the SCANNER ( ) key.

The unit enters scan mode.

Place the original you wish to scan on the original table/SPF/ RSPF.

For the procedure for placing the original, see "ORIGINAL PLACEMENT"	4
(p.47).

Press the right copy quantity key to display the number of the application that you wish to use for scanning.

The application numbers are initially as follows.

Application	Application launched
number
SC1	Sharpdesk (Full colour) (if installed)
SC2	Sharpdesk (Monochrome) (if installed)
SC3	E-mail (your standard e-mail program in the
	Windows OS you are using)
SC4	Fax (if a fax program is installed)
SC5	OCR (if an OCR program is installed)
SC6	Microsoft Word (if installed)

To check the settings, see "Scan Parameter Settings Dialog Box" (p.37) and then open the settings window of the Button Manager.

39