Sharp AL-1555, AL-1553, AL-1552 operation manual TWO Sided Copying, Making two-sided copies

6 SPECIAL FUNCTIONS

This chapter describes the special functions of this unit. Use these functions as needed.

TWO SIDED COPYING

When copying from the SPF/RSPF, two-side originals can be copied automatically without having to manually turn them over. Automatic two-sided copying can also be performed without using the SPF/RSPF. When copying from one-sided originals to two-sided copies, copying orientation can be selected between Turn on Long Edge and Turn on Short Edge.

•When making two-sided copies from the original table, the paper size

must be A4, letter. When making two-sided copies from the SPF/ RSPF, A4, B5, A5, letter, legal, and invoice sizes can be used. Non- standard size paper cannot be used.

•When making two-sided copies, the multi-bypass tray cannot be used.

•When using two-sided invoice size originals from the SPF/RSPF, be sure to place them in the landscape orientation. Otherwise, an original misfeed will occur.

		A
A	A
		A
Turn on Long Edge

Making two-sided copies

A

A A

A

Turn on Short Edge

1

2

Place the original on the original table or in the SPF/RSPF. (see "ORIGINAL PLACEMENT" (p.47).

Select two-sided copy mode.

52