Sharp AL-1555 Setting a large original AL-1552, Using the SPF/RSPF, Original feeder tray

Setting a large original (AL-1552)

The original cover can be removed to allow copying of bulky objects.

1 Simply lift the original cover straight up.

2 To reattach the original cover, reverse the above procedure.

Using the SPF/RSPF

The SPF is designed to hold up to 30 originals measuring from A5 to A4 and weighting from 52g/m2 to 90g/m2.

•Before feeding originals in the original feeder tray, be sure to remove

any staples or paper clips from them.

•Before placing curled or wavy originals into the original feeder tray, be sure to flatten them. If not, original misfeeds may result.

•The SPF/RSPF ( ) indicator on the operation panel will light up. If this indicator does not light up, the originals are not properly set or the SPF/RSPF is not properly closed.

•Badly damaged originals may misfeed in the SPF/RSPF. It is recommended that such originals be copied from the original table.

•Special originals such as transparency film should not be fed through the SPF/RSPF, but should be placed directly on the original table.

•Image loss (max. 4 mm) can occur at the leading and trailing edges of the copies. Also image loss (max. 4.5 mm in total) can occur along the other edges of the copies. It can be 6 mm (max.) at the trailing edge of the second copy of two-sided copying.

•To stop continuous copying using the SPF/RSPF, press the clear () key.

•Copying using one-sided to one-sided mode (AL-1555) :

Ensure that no indicator is lit among the original to copy indicators.

1

2

3

Make sure that no original is left on the original table.

Adjust the original guides to the size of originals.

Set the originals face up in the	Original face up
original feeder tray.

48