Sharp AL-1600 operation manual Loading Copy Paper, Push the paper tray firmly back into the copier

Page 15

LOADING COPY PAPER

To save space, this copier has been designed with an adjustable front-loading tray, which is easily opened for paper loading. For best results, use only SHARP recommended paper. (See page 40.)

The paper required ( ) indicator will light up when there is no copy paper in the selected paper feed station, or when the paper tray is not installed or is improperly installed.

If you change the copy paper size in the tray, be sure to set the paper size using user program No. 21. See page 32.

GETTING STARTED

1

2

3

Maximum height line

Gently lift and pull out the paper tray until it stops.

Push the pressure plate down until it locks in place.

Fan the copy paper and insert it into the tray. Make sure the edges go under the corner hooks.

●If you change to a different size of copy paper, the tray must be adjusted. See the next page.

●Set the paper along the guides.

●The tray holds up to 250 sheets of 21 lb. bond paper. Do not load paper above the maximum height line.

Loading copy paper

4 Push the paper tray firmly back into the copier.

13

Image 15

Contents AL-1600 AL-1610 For Your Protection Contents Safety Precautions Main Features Part Names and Functions Part Names and Functions Power Save indicator p AUTO/MANUAL/PHOTO / / key and indicators pAlarm indicators Interrupt key and indicator p3Copy ratio display key p 6START key and indicatorInitial settings 2Zoom keys pDo not install your copier in areas that are Copier InstallationGetting Started Unpacking Checking Packed Components and AccessoriesSET-UP Install the TD cartridgeSET-UP Turn the power switch on Load copy paperPush the paper tray firmly back into the copier Loading Copy PaperLoading Copy Paper Push gently the right side of the front cover to open Cover TD Cartridge ReplacementTD Cartridge Replacement By the right hand. Lift the cartridge by the handle while Lift the TD cartridge lock release lever and pullTo remove it Cartridge out until the green strap handle can be graspedDrum Cartridge Replacement Misfeed Removal Misfeed in the bypass trayMisfeed in the copier Misfeed in the paper feed area Misfeed RemovalArrow Turn the roller rotating knob in the directionClose the side cover by pressing the handle on the cover Misfeed in the paper traySetting the user programs User ProgramsList of user programs User Programs Power Save Modes Preheat modeAuto power shut-off mode Power Save Modes Setting the power save modesCopying from the preheat mode Transfer charger User MaintenanceOriginal table and platen cover Bypass tray paper feed rollerUser Maintenance Charger cleaner out by holding the tabGently lift and pull out the paper tray and take Copier TROUBLE? Problem SolutionSelf-diagnostic function Copier TROUBLE?Example Supply list SuppliesTypes and sizes of copy paper Supply part numbersStore the supplies in a location that is SuppliesGenuine supplies statement Proper storageTurn the power switch off and disconnect the power Cord Moving InstructionsGently lift and pull out the paper tray until it stops Specifications Specifications Index Index Material Safety Data Sheet Flammable Limits Ignition TemperatureSpecial Fire Fighting Procedure Flash Point Method UsedIngredients CAS No Proportion Other LimitsHealth Hazards None required under normal use Memo Memo For users in the USA Sharp Corporation