Sharp AL-1600 operation manual Part Names and Functions

Page 6

GETTING STARTED

Part names and functions

PART NAMES AND FUNCTIONS

Overall layout

 

 

 

e

q

 

 

 

 

 

o

 

w

 

 

!1

 

 

 

 

y

!0

!2

e

!3

 

 

 

u

r t

!4

i

qPlaten cover

Place the original on the original table and close the platen cover before copying starts.

wOriginal table

Place the document to be copied here.

iPaper tray

Holds 250 sheets of copy paper.

oSide cover

Open to remove misfeeds and to service the copier.

!0Side cover handle

eHandles

Use to move the copier.

rPower switch

Press to turn copier power on and off.

tOperation panel

All copier controls are located here for easy operation.

yPaper output tray

Finished copies are deposited in the paper output tray.

uFront cover

Open to remove misfeeds and for copier servicing.

Lift and pull to open the side cover.

!1Bypass tray guides

Adjust to the width of the copy paper.

!2Bypass tray

Special papers (including transparency film) and copy paper can be fed from the bypass tray.

!3Bypass tray extension

Pull out when feeding large paper such as 8-1/2" x 14" and 11" x 17".

!4Charger cleaner

Use to clean the transfer charger.

4

Image 6
Contents AL-1600 AL-1610 For Your Protection Contents Safety Precautions Main Features Part Names and Functions Part Names and Functions Interrupt key and indicator p AUTO/MANUAL/PHOTO / / key and indicators pAlarm indicators Power Save indicator p2Zoom keys p 6START key and indicatorInitial settings 3Copy ratio display key pCopier Installation Do not install your copier in areas that areGetting Started Checking Packed Components and Accessories UnpackingInstall the TD cartridge SET-UPTurn the power switch on Load copy paper SET-UPLoading Copy Paper Push the paper tray firmly back into the copierLoading Copy Paper TD Cartridge Replacement Push gently the right side of the front cover to open CoverTD Cartridge Replacement Cartridge out until the green strap handle can be grasped Lift the TD cartridge lock release lever and pullTo remove it By the right hand. Lift the cartridge by the handle whileDrum Cartridge Replacement Misfeed Removal Misfeed in the bypass trayMisfeed in the copier Misfeed Removal Misfeed in the paper feed areaTurn the roller rotating knob in the direction ArrowMisfeed in the paper tray Close the side cover by pressing the handle on the coverSetting the user programs User ProgramsList of user programs User Programs Power Save Modes Preheat modeAuto power shut-off mode Power Save Modes Setting the power save modesCopying from the preheat mode Bypass tray paper feed roller User MaintenanceOriginal table and platen cover Transfer chargerUser Maintenance Charger cleaner out by holding the tabGently lift and pull out the paper tray and take Problem Solution Copier TROUBLE?Self-diagnostic function Copier TROUBLE?Example Supply part numbers SuppliesTypes and sizes of copy paper Supply listProper storage SuppliesGenuine supplies statement Store the supplies in a location that isTurn the power switch off and disconnect the power Cord Moving InstructionsGently lift and pull out the paper tray until it stops Specifications Specifications Index Index Material Safety Data Sheet Flash Point Method Used Ignition TemperatureSpecial Fire Fighting Procedure Flammable LimitsIngredients CAS No Proportion Other LimitsHealth Hazards None required under normal use Memo Memo For users in the USA Sharp Corporation