Sharp AL-1600 User Maintenance, Original table and platen cover, Bypass tray paper feed roller

Page 29

User maintenanceGENERAL INFORMATION

USER MAINTENANCE

Proper care is essential for clean, sharp copies. Please take a few minutes to regularly clean your copier.

Original table and platen cover

Stains or dirt on the original table or platen cover will also be copied. Wipe the original table and platen cover with a soft, clean cloth.

●If necessary, dampen the cloth with water. Do not use thinner, benzene, or similar volatile cleaning agents.

Bypass tray paper feed roller

If misfeeds occur frequently when feeding postcards, envelopes, thick paper, etc. through the bypass tray, wipe the blue paper feed roller at the feed slot of the bypass tray with a soft, clean cloth dampened with alcohol or water.

Paper feed roller

Transfer charger

If copies start becoming streaky or blotchy, the transfer charger may be dirty. Clean the charger. The cleaning method is described on the next page.

36

Image 29

Contents AL-1600 AL-1610 For Your Protection Contents Safety Precautions Main Features Part Names and Functions Part Names and Functions Alarm indicators AUTO/MANUAL/PHOTO / / key and indicators pInterrupt key and indicator p Power Save indicator pInitial settings 6START key and indicator2Zoom keys p 3Copy ratio display key pDo not install your copier in areas that are Copier InstallationGetting Started Unpacking Checking Packed Components and AccessoriesSET-UP Install the TD cartridgeSET-UP Turn the power switch on Load copy paperPush the paper tray firmly back into the copier Loading Copy PaperLoading Copy Paper Push gently the right side of the front cover to open Cover TD Cartridge ReplacementTD Cartridge Replacement To remove it Lift the TD cartridge lock release lever and pullCartridge out until the green strap handle can be grasped By the right hand. Lift the cartridge by the handle whileDrum Cartridge Replacement Misfeed in the copier Misfeed RemovalMisfeed in the bypass tray Misfeed in the paper feed area Misfeed RemovalArrow Turn the roller rotating knob in the directionClose the side cover by pressing the handle on the cover Misfeed in the paper trayList of user programs Setting the user programsUser Programs User Programs Auto power shut-off mode Power Save ModesPreheat mode Copying from the preheat mode Power Save ModesSetting the power save modes Original table and platen cover User MaintenanceBypass tray paper feed roller Transfer chargerGently lift and pull out the paper tray and take User MaintenanceCharger cleaner out by holding the tab Copier TROUBLE? Problem SolutionExample Self-diagnostic functionCopier TROUBLE? Types and sizes of copy paper SuppliesSupply part numbers Supply listGenuine supplies statement SuppliesProper storage Store the supplies in a location that isGently lift and pull out the paper tray until it stops Turn the power switch off and disconnect the power CordMoving Instructions Specifications Specifications Index Index Material Safety Data Sheet Special Fire Fighting Procedure Ignition TemperatureFlash Point Method Used Flammable LimitsHealth Hazards Ingredients CAS No ProportionOther Limits None required under normal use Memo Memo For users in the USA Sharp Corporation