Sharp AL-1600 Misfeed in the paper tray, Close the side cover by pressing the handle on the cover

Page 24

MISFEED REMOVAL

3 Close the side cover by pressing the handle on the cover.

●The misfeed ( ) indicator will go out.

Misfeed in the paper tray

Before opening the paper tray, be sure to open the bypass tray, lift slightly on the side cover and slide the cover out until it stops, and then perform steps 1 to 3 described in the “A. Misfeed in the paper feed area” section.

Gently lift and pull out the paper tray and remove the

1 misfed paper.

2 Close the paper tray.

STATUS INDICATORS

Lift slightly on the side cover and slide the cover out

3 until it stops. Close the side cover by pressing the handle on the cover.

●The misfeed ( ) indicator will go out.

Misfeed removal

31

Image 24

Contents AL-1600 AL-1610 For Your Protection Contents Safety Precautions Main Features Part Names and Functions Part Names and Functions AUTO/MANUAL/PHOTO / / key and indicators p Alarm indicatorsInterrupt key and indicator p Power Save indicator p6START key and indicator Initial settings2Zoom keys p 3Copy ratio display key pCopier Installation Do not install your copier in areas that areGetting Started Checking Packed Components and Accessories UnpackingInstall the TD cartridge SET-UPTurn the power switch on Load copy paper SET-UPLoading Copy Paper Push the paper tray firmly back into the copierLoading Copy Paper TD Cartridge Replacement Push gently the right side of the front cover to open CoverTD Cartridge Replacement Lift the TD cartridge lock release lever and pull To remove itCartridge out until the green strap handle can be grasped By the right hand. Lift the cartridge by the handle whileDrum Cartridge Replacement Misfeed Removal Misfeed in the bypass trayMisfeed in the copier Misfeed Removal Misfeed in the paper feed areaTurn the roller rotating knob in the direction ArrowMisfeed in the paper tray Close the side cover by pressing the handle on the coverSetting the user programs User ProgramsList of user programs User Programs Power Save Modes Preheat modeAuto power shut-off mode Power Save Modes Setting the power save modesCopying from the preheat mode User Maintenance Original table and platen coverBypass tray paper feed roller Transfer chargerUser Maintenance Charger cleaner out by holding the tabGently lift and pull out the paper tray and take Problem Solution Copier TROUBLE?Self-diagnostic function Copier TROUBLE?Example Supplies Types and sizes of copy paperSupply part numbers Supply listSupplies Genuine supplies statementProper storage Store the supplies in a location that isTurn the power switch off and disconnect the power Cord Moving InstructionsGently lift and pull out the paper tray until it stops Specifications Specifications Index Index Material Safety Data Sheet Ignition Temperature Special Fire Fighting ProcedureFlash Point Method Used Flammable LimitsIngredients CAS No Proportion Other LimitsHealth Hazards None required under normal use Memo Memo For users in the USA Sharp Corporation