Sharp AL-1600 operation manual User Programs

USER PROGRAMS

4 Select the desired parameter using the right copy quantity

( ) key.

● The entered parameter number will blink on the right side of the copy quantity display.

●The parameters are shown in the table below.

For example, to change the setting of the auto power shut-off timer to 60 min., enter 2.

Program name	Parameters
Auto clear time	0 e OFF	1 e 30 sec.	* 2 e 60 sec.	3 e 90 sec.		4 e 120 sec.
	5 e 10 sec.
Preheat mode	0 e OFF	1 e 30 sec.	2 e 60 sec.	* 3 e 90 sec.		4 e 120 sec.
Auto power shut-off timer	* 1 e 30 min.	2 e 60 min.	3 e 90 min.	4 e 120 min.		5 e 240 min.
Auto power shut-off setting	0 e OFF	* 1 e ON
Paper size setting	1 e 11"x17"	2 e 8-1/2"x14" * 3 e 8-1/2"x11"			4 e 8-1/2"x11"R
	5 e 5-1/2"x8-1/2"

Factory default settings are indicated with an asterisk (*).

If you select “0” (OFF) in a program, the corresponding function will be disabled.

5	Press the START (	) key.
	● The right-hand number in the copy quantity display will be steadily lit

and the entered value will be stored.

To continue with other user programs, press the CLEAR

6 ( ) key and then repeat steps 2 to 5. To exit the user

program mode, press the light ( ) key.

●All the alarm indicators will go out.

User programsGENERAL INFORMATION

33