DRUM CARTRIDGE REPLACEMENT
The useful life of the drum cartridge is approximately 30,000 copies. When the internal counter reaches approximately 29,000 copies, the drum replacement required (
) indicator will light up indicating that replacement of the drum cartridge will be needed soon. When the indicator begins to blink, replace the drum cartridge by following the procedure given below.
Do not remove the protective cover on the drum portion (black paper) of a new drum cartridge before use. The cover protects the drum against external light.
For best copying results, be sure to use only SHARP Genuine Supplies which are designed, engineered and tested to maximize the life and performance of SHARP copiers. Look for the Genuine Supplies label on the drum package.
GENUINE SUPPLIES
Open the bypass tray. Lift slightly on the side cover and
1 slide the cover out until it stops.
STATUS INDICATORS Drum cartridge replacement
Push gently the right side of the front cover to open the
2 cover.
TD cartridge lock | Lift the TD cartridge lock release lever and pull the | |
3 cartridge out until the green strap handle can be grasped | ||
release lever | ||
| by the right hand. Lift the cartridge by the handle while | |
| supporting it with the left hand at the green label position | |
| to remove it. |
4 Grasp the handle of the drum cartridge and gently pull the cartridge out.
● Dispose of the old drum cartridge in accordance with local regulations.
26