POWER SAVE MODES
Setting the power save modes
The time that elapses before the copier enters a power save mode after any operation is made can be set manually. This time is set with user program No. 2 for the preheat mode and user program No. 3 for the auto power
●The copier will enter the preheat mode first and then the auto power shut- off mode after a preset time has elapsed when no copier operation has been made.
●If conflicting settings are made with user programs No. 3 and No.5, the last program set will have priority.
Copying from the preheat mode
Make desired copier selections and press the START
( 
) key using the normal copying procedure.
●When any key input is made or any other copier operation is made, the
POWER SAVE ( 
) indicator will start to blink.
●When the START ( 
) key is pressed, the START key ( 
) indicator will go out and copying will start within 10 seconds. The
POWER SAVE ( 
) indicator will go out when copying starts.
Power save modes GENERAL INFORMATION
35