Sharp PN-R703, PN-R603 Preparing the Remote Control Unit, 15 E, Installing the batteries

Page 15

Preparing the Remote Control Unit

Installing the batteries

1.Press the cover gently and slide it in the direction of the arrow.

2.See the instructions in the compartment and put in the supplied batteries (R-6 (“AA” size) x 2) with their plus (+) and minus (-) sides oriented correctly.

3.Close the cover.

TIPS

When the batteries become exhausted, replace them with new (commercially available) batteries.

The supplied batteries (R-6 (“AA” size) x 2) may become exhausted quickly depending on how they are stored.

If you will not be using the remote control for a long time, remove the batteries.

Use manganese or alkaline batteries only.

Remote control operation range

Operation panel in

The remote control can be operated even when the operation panel is stored inside the monitor.

Point the remote control toward the remote control sensor on the bottom of the monitor (or the right side of the monitor if using portrait orientation).

For the monitor in landscape orientation

For the monitor in portrait orientation

 

 

 

 

Remote control sensor

35º

 

 

 

 

16.4 feet

 

 

 

 

(5m)

10º

 

16.4 feet Remote control sensor

10º

10º

10º

 

 

 

10º

 

10º10º

(5m)

 

35º

 

 

 

10º

 

Operation panel out

Point the remote control toward the remote control sensor on the front of the monitor.

For the monitor in landscape orientation

For the monitor in portrait orientation

 

10º

10º

16.4 feet Remote control sensor

 

10º 10º (5m)

TIPS

10º

16.4 feet Remote control sensor

 

(5m)

10º

10º

 

 

10º

Do not expose the remote control unit to shock by dropping or stepping on it. This could lead to a malfunction.

Do not expose the remote control unit to liquids, and do not place it in an area with high humidity.

The remote control unit may not work properly if the remote control sensor is under direct sunlight or strong lighting.

Objects between the remote control unit and the remote control sensor may prevent proper operation.

Replace the batteries when they run low as this may shorten the remote control’s operation range.

If a fluorescent light is illuminated near the remote control unit, it may interfere with proper operation.

Do not use it with the remote control of other equipment such as air conditioner, stereo components, etc.

15 E

Image 15
Contents PN-R703 PN-R603 A. only Model No Serial NoImportant Information Refer Servicing to Qualified Service PersonnelDear Sharp Customer Safety Precautions Necessary to replace the LED backlight Tips and Safety InstructionsFor the monitor in portrait orientation For the monitor in landscape orientationSupplied Components ContentsPart Names NFront viewNRear view Return button See Size button See Part Names NRemote control unitSignal transmitter Power button See Mute button SeeConnecting Peripheral Equipment 11 EConnection with a PC or AV equipment Connecting Peripheral Equipment 13 E Connecting the Power CordCable Cable clamp attachment Binding Cables15 E Preparing the Remote Control UnitInstalling the batteries Remote control operation rangeMain power switch Turning Power On/OffTurning on the main power Turning power on/off17 E Disabling power on/off operationsNDate/time setting Turning Power On/OffBasic Operation Dot by Dot Basic Operation NSwitching the screen size19 E Wide Zoom NormalNMenu screen display Menu ItemsDisplaying the menu screen NExample of operationNSCREEN 21 EMenu item details Menu ItemsMenu Items NPICTURE Display Color Pattern 23 EAdvanced 3D-Y/C D-SUBVIDEOMenu Items NAUDIO NSETUP25 E Menu Items NMONITOR Menu Items NMULTI/PIP 27 EMenu Items NOTHERS Menu Items NEnlarge NZOOM2 Special Setting29 E NDual screen displayInput PowerMenu Items NSCHEDULE DAY of the Week31 E Adjustments for PC screen displayNAutomatic adjustment NScreen display for adjustmentTemperature Alert ALL ResetAdjustment Lock Adjustment Lock TargetPC connection Communication procedureControlling the Monitor with a PC RS-232C 33 ENID numbers NCommunication intervalWait ← 35 ESetting of the Gamma user data 37 E RS-232C command tablePower control/Input mode selection How to read the command tablePicture menu Controlling the Monitor with a PC RS-232C Screen menuAudio menu 39 EControlling the Monitor with a PC RS-232C Setup menu Controlling the Monitor with a PC RS-232C Monitor menu 41 EImage Position Epos setting Controlling the Monitor with a PC RS-232C MULTI/PIP menuLandscape orientation Portrait orientation Others menu 43 EOthers Commands for setting of the Gamma user dataTo set on the monitor Settings to connect to a LANControlling the Monitor with a PC LAN 45 EControlling the Monitor with a PC LAN To set from a PC Default Gateway 0.0Basic operation 47 EControlling with a PC Controlling the Monitor with a PC LANInformation about this monitor appears Standby mode, Power on is the operation availableDNS Server User Name / Password49 E DNS Server Address Auto AcquisitionAccount Name / Password Installation Information NAME/LOCATIONLink Mode AuthenticationConfirmation 51 ERecipient E-MAIL Addresses ConditionVersion Snmp SettingTrap Setting Trap Setting of Authentication Error53 E Troubleshooting 55 E TroubleshootingNProduct Specifications SpecificationsNDimensional Drawings Specifications57 E Specifications NPower management Dmpm Digital Monitor Power ManagementNDDC plug and play Specifications NCompatible signal timing PC NCompatible signal timing AV59 E NPC/AV D-sub input terminal pins NRS-232C input terminal pinsNDisplayPort input terminal pins 61 E NDVI-D output terminal pinsNDisplayPort output terminal pins Specifications NRS-232C output terminal pinsMounting Precautions For Sharp dealers and service engineers PN-R703R603 Mu EN12M1
Related manuals
Manual 63 pages 20.43 Kb Manual 28 pages 3.2 Kb

PN-R703, PN-R603 specifications

The Sharp PN-R603 and PN-R703 are advanced commercial display monitors designed to deliver high-quality visuals and reliable performance for a variety of applications. These models are part of Sharp’s professional display lineup, making them ideal for environments such as retail stores, conference rooms, and control centers.

One of the standout features of the PN-R603 and PN-R703 is their exceptional image quality. Both models utilize Sharp’s innovative LCD technology, which ensures stunning color reproduction and clarity. With a native resolution of 1920 x 1080 pixels, these displays present clear, detailed images that are perfect for showcasing videos, presentations, or advertising content. The brightness of up to 700 cd/m² ensures visibility even in well-lit environments, making them practical for almost any setting.

Both models incorporate an ultra-slim design, allowing for seamless integration into any environment. Whether mounted on walls or placed on stands, the PN-R603 and PN-R703 maintain an elegant profile that enhances their surroundings. The frameless bezel design further maximizes the viewing area, creating an immersive experience for users.

In terms of connectivity, these displays offer a comprehensive suite of options. HDMI, DisplayPort, and VGA inputs facilitate quick and easy connections to various devices, including computers, media players, and video conferencing systems. This flexibility enables users to seamlessly switch between different formats and sources without hassle.

The PN-R603 and PN-R703 are not just visually appealing; they are also designed for durability and reliability. With a robust construction that supports continuous operation, these displays are well-suited for 24/7 use, making them ideal for mission-critical applications. The built-in cooling system ensures optimal performance while minimizing the risk of overheating, thus extending the lifespan of the units.

Additionally, both models come equipped with essential features such as integrated USB media playback, allowing users to display content directly from USB drives without requiring a connected PC. This feature streamlines the process of sharing information and makes setting up presentations easier.

In summary, the Sharp PN-R603 and PN-R703 exhibit a host of features that cater to the needs of professional environments. From their stunning display quality and versatile connectivity options to their durable construction and ease of use, these monitors represent a robust solution for businesses looking to enhance their visual communications. Whether for advertising, presentations, or information displays, the PN-R603 and PN-R703 stand out as reliable and effective choices.