Sharp PN-R703, PN-R603 Controlling the Monitor with a PC LAN, 45 E, Settings to connect to a LAN

Page 45

Controlling the Monitor with a PC (LAN)

Your monitor can be connected to a LAN allowing you to control it from a PC on the LAN.

You can also configure the monitor to send e-mail notification when it has a problem.

The connection requires a commercially available LAN cable (UTP cable, Category 5, straight through).

Network (LAN)

Hub

LAN terminal

LAN cable (commercially available, straight)

TIPS

You must assign an IP address to the monitor by following the procedures in “Settings to connect to a LAN”. (See the description on the right.)

Your PC must be installed with Internet Explorer (version 7.0 or later).

To control the monitor via LAN, set RS-232C/LAN SELECT to LAN. (See page 25.)

You cannot use RS-232C and LAN control simultaneously.

Initializing personal information

Personal information such as e-mail addresses can be registered in the monitor. Before transferring or disposing of the monitor, initialize all settings by selecting ALL RESET 1. (See page 32.) Note that ALL RESET 2 will not initialize e-mail addresses and other settings.

Settings to connect to a LAN

Set the monitor’s IP address and subnet mask to match the settings of your LAN.

These settings can be made on either the monitor or a PC connected to the monitor.

The settings depend on the configuration of your LAN. Ask your LAN administrator for details.

■ To set on the monitor

Set RS-232C/LAN SELECT of COMMUNICATION SETTING on the SETUP menu to LAN, and then set the LAN SETUP options. (See page 25.)

After setting each item, select SET and press ENTER.

DHCP CLIENT

If your LAN has a DHCP server and you wish to obtain an address automatically, change this setting to ON.

To set the address manually, set this to OFF.

IP ADDRESS

If the DHCP CLIENT is set to OFF, specify an IP address.

Press or to select items, and press or to change the values.

SUBNET MASK

If the DHCP CLIENT is set to OFF, specify the subnet mask.

Press or to select items, and press or to change the values.

DEFAULT GATEWAY

If the DHCP CLIENT is set to OFF, specify the default gateway.

If you are not using a gateway, specify “0.0.0.0”.

Press or to select items, and press or to change the values.

RESET

Resets the values of the LAN settings to the factory preset values.

Select ON and then press ENTER.

TIPS

When the IP address is set manually, the IP addresses of the monitor connected to the RS-232C output terminal and the daisy chain of connected monitors that follows can be assigned automatically. (See page 25.)

45 E

Image 45
Contents PN-R703 PN-R603 A. only Model No Serial NoImportant Information Refer Servicing to Qualified Service PersonnelDear Sharp Customer Safety Precautions Necessary to replace the LED backlight Tips and Safety InstructionsFor the monitor in portrait orientation For the monitor in landscape orientationSupplied Components ContentsPart Names NFront viewNRear view Signal transmitter Part Names NRemote control unitPower button See Mute button See Return button See Size button SeeConnecting Peripheral Equipment 11 EConnection with a PC or AV equipment Connecting Peripheral Equipment 13 E Connecting the Power CordCable Cable clamp attachment Binding CablesInstalling the batteries Preparing the Remote Control UnitRemote control operation range 15 ETurning on the main power Turning Power On/OffTurning power on/off Main power switchNDate/time setting Disabling power on/off operationsTurning Power On/Off 17 EBasic Operation 19 E Basic Operation NSwitching the screen sizeWide Zoom Normal Dot by DotDisplaying the menu screen Menu ItemsNExample of operation NMenu screen displayMenu item details 21 EMenu Items NSCREENMenu Items NPICTURE Advanced 23 E3D-Y/C D-SUBVIDEO Display Color PatternMenu Items NAUDIO NSETUP25 E Menu Items NMONITOR Menu Items NMULTI/PIP 27 EMenu Items NOTHERS 29 E NZOOM2 Special SettingNDual screen display Menu Items NEnlargeMenu Items NSCHEDULE PowerDAY of the Week InputNAutomatic adjustment Adjustments for PC screen displayNScreen display for adjustment 31 EAdjustment Lock ALL ResetAdjustment Lock Target Temperature AlertControlling the Monitor with a PC RS-232C Communication procedure33 E PC connectionNID numbers NCommunication intervalWait ← 35 ESetting of the Gamma user data Power control/Input mode selection RS-232C command tableHow to read the command table 37 EPicture menu Controlling the Monitor with a PC RS-232C Screen menuAudio menu 39 EControlling the Monitor with a PC RS-232C Setup menu Controlling the Monitor with a PC RS-232C Monitor menu 41 EImage Position Epos setting Controlling the Monitor with a PC RS-232C MULTI/PIP menuLandscape orientation Portrait orientation Others menu 43 EOthers Commands for setting of the Gamma user dataControlling the Monitor with a PC LAN Settings to connect to a LAN45 E To set on the monitorControlling the Monitor with a PC LAN To set from a PC Default Gateway 0.0Controlling with a PC 47 EControlling the Monitor with a PC LAN Basic operationInformation about this monitor appears Standby mode, Power on is the operation available49 E User Name / PasswordDNS Server Address Auto Acquisition DNS ServerLink Mode Installation Information NAME/LOCATIONAuthentication Account Name / PasswordRecipient E-MAIL Addresses 51 ECondition ConfirmationTrap Setting Snmp SettingTrap Setting of Authentication Error Version53 E Troubleshooting 55 E TroubleshootingNProduct Specifications SpecificationsNDimensional Drawings Specifications57 E Specifications NPower management Dmpm Digital Monitor Power ManagementNDDC plug and play Specifications NCompatible signal timing PC NCompatible signal timing AV59 E NPC/AV D-sub input terminal pins NRS-232C input terminal pinsNDisplayPort input terminal pins NDisplayPort output terminal pins NDVI-D output terminal pinsSpecifications NRS-232C output terminal pins 61 EMounting Precautions For Sharp dealers and service engineers PN-R703R603 Mu EN12M1
Related manuals
Manual 63 pages 20.43 Kb Manual 28 pages 3.2 Kb

PN-R703, PN-R603 specifications

The Sharp PN-R603 and PN-R703 are advanced commercial display monitors designed to deliver high-quality visuals and reliable performance for a variety of applications. These models are part of Sharp’s professional display lineup, making them ideal for environments such as retail stores, conference rooms, and control centers.

One of the standout features of the PN-R603 and PN-R703 is their exceptional image quality. Both models utilize Sharp’s innovative LCD technology, which ensures stunning color reproduction and clarity. With a native resolution of 1920 x 1080 pixels, these displays present clear, detailed images that are perfect for showcasing videos, presentations, or advertising content. The brightness of up to 700 cd/m² ensures visibility even in well-lit environments, making them practical for almost any setting.

Both models incorporate an ultra-slim design, allowing for seamless integration into any environment. Whether mounted on walls or placed on stands, the PN-R603 and PN-R703 maintain an elegant profile that enhances their surroundings. The frameless bezel design further maximizes the viewing area, creating an immersive experience for users.

In terms of connectivity, these displays offer a comprehensive suite of options. HDMI, DisplayPort, and VGA inputs facilitate quick and easy connections to various devices, including computers, media players, and video conferencing systems. This flexibility enables users to seamlessly switch between different formats and sources without hassle.

The PN-R603 and PN-R703 are not just visually appealing; they are also designed for durability and reliability. With a robust construction that supports continuous operation, these displays are well-suited for 24/7 use, making them ideal for mission-critical applications. The built-in cooling system ensures optimal performance while minimizing the risk of overheating, thus extending the lifespan of the units.

Additionally, both models come equipped with essential features such as integrated USB media playback, allowing users to display content directly from USB drives without requiring a connected PC. This feature streamlines the process of sharing information and makes setting up presentations easier.

In summary, the Sharp PN-R603 and PN-R703 exhibit a host of features that cater to the needs of professional environments. From their stunning display quality and versatile connectivity options to their durable construction and ease of use, these monitors represent a robust solution for businesses looking to enhance their visual communications. Whether for advertising, presentations, or information displays, the PN-R603 and PN-R703 stand out as reliable and effective choices.