Sharp PN-R703 For the monitor in landscape orientation, For the monitor in portrait orientation

Page 7

MOUNTING PRECAUTIONS

This product is for use indoors.

A mounting bracket compliant with VESA specifications is required.

Since the monitor is heavy, consult your dealer before installing, removing or moving the monitor.

Mounting the monitor on the wall requires special expertise and the work must be performed by an authorized SHARP dealer. You should never attempt to perform any of this work yourself. Our company will bear no responsibility

for accidents or injuries caused by improper mounting or mishandling.

Use the monitor with the surface perpendicular to a level surface. If necessary, the monitor may be tilted up to 20 degrees upward or downward.

This monitor should be used at an ambient temperature between 32°F (0°C) and 104°F (40°C). Provide enough space around the monitor to prevent heat from accumulating inside.

For the monitor in landscape orientation

 

7-7/8 [200]

Unit: inch [mm]

 

5/16 [7]

 

 

2

 

2

[50]

 

[50]

 

2 [50]

 

For the monitor in portrait orientation

 

 

Unit: inch [mm]

 

7-7/8 [200]

5/16 [7]

 

 

2

2

 

[50]

[50]

 

 

2 [50]

Power LED

 

 

If it is difficult to provide sufficient space for any reason such as the installation of the monitor inside a housing, or if the ambient temperature may be outside of the range of 32°F (0°C) to 104°F (40°C), install a fan or take other measures to keep the ambient temperature within the required range.

Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such cases, please check the temperature condition specified by the optional equipments.

Do not block any ventilation openings. If the temperature inside the monitor rises, this could lead to a malfunction.

Do not place the monitor on a device which generates heat.

Adhere to the following when installing the monitor in its portrait orientation. Failing to adhere to the following may cause malfunctions.

-Install the monitor such that the power LED is located on the bottom side.

-Set the MONITOR on the MONITOR menu to PORTRAIT. (See page 26.)

-Be sure to clamp the power cord (supplied) onto the cable clamp attachment using the supplied cable clamp. When clamping the power cord, take care not to stress the terminal of the power cord. Do not bend the power cord excessively.

Power cord (Supplied) Cable clamp attachment

Cable clamp

Use the supplied vertical sticker when you install the monitor in portrait orientation.

Operation panel

Cover SHARP logo

Logo

Do not remove the factory-affixed sticker but affix the sticker over it. Be careful not to cover the remote control sensor or buttons.

7 E

Image 7
Contents PN-R703 PN-R603 A. only Model No Serial NoImportant Information Refer Servicing to Qualified Service PersonnelDear Sharp Customer Safety Precautions Necessary to replace the LED backlight Tips and Safety InstructionsFor the monitor in portrait orientation For the monitor in landscape orientationSupplied Components ContentsNFront view Part NamesNRear view Return button See Size button See Part Names NRemote control unitSignal transmitter Power button See Mute button See11 E Connecting Peripheral EquipmentConnection with a PC or AV equipment Connecting Peripheral Equipment 13 E Connecting the Power CordCable Cable clamp attachment Binding Cables15 E Preparing the Remote Control UnitInstalling the batteries Remote control operation rangeMain power switch Turning Power On/OffTurning on the main power Turning power on/off17 E Disabling power on/off operationsNDate/time setting Turning Power On/OffBasic Operation Dot by Dot Basic Operation NSwitching the screen size19 E Wide Zoom NormalNMenu screen display Menu ItemsDisplaying the menu screen NExample of operationNSCREEN 21 EMenu item details Menu ItemsMenu Items NPICTURE Display Color Pattern 23 EAdvanced 3D-Y/C D-SUBVIDEOMenu Items NAUDIO NSETUP25 E Menu Items NMONITOR Menu Items NMULTI/PIP 27 EMenu Items NOTHERS Menu Items NEnlarge NZOOM2 Special Setting29 E NDual screen displayInput PowerMenu Items NSCHEDULE DAY of the Week31 E Adjustments for PC screen displayNAutomatic adjustment NScreen display for adjustmentTemperature Alert ALL ResetAdjustment Lock Adjustment Lock TargetPC connection Communication procedureControlling the Monitor with a PC RS-232C 33 ENID numbers NCommunication intervalWait ← 35 ESetting of the Gamma user data 37 E RS-232C command tablePower control/Input mode selection How to read the command tablePicture menu Controlling the Monitor with a PC RS-232C Screen menuAudio menu 39 EControlling the Monitor with a PC RS-232C Setup menu Controlling the Monitor with a PC RS-232C Monitor menu 41 EControlling the Monitor with a PC RS-232C MULTI/PIP menu Image Position Epos settingLandscape orientation Portrait orientation Others menu 43 EOthers Commands for setting of the Gamma user dataTo set on the monitor Settings to connect to a LANControlling the Monitor with a PC LAN 45 EControlling the Monitor with a PC LAN To set from a PC Default Gateway 0.0Basic operation 47 EControlling with a PC Controlling the Monitor with a PC LANInformation about this monitor appears Standby mode, Power on is the operation availableDNS Server User Name / Password49 E DNS Server Address Auto AcquisitionAccount Name / Password Installation Information NAME/LOCATIONLink Mode AuthenticationConfirmation 51 ERecipient E-MAIL Addresses ConditionVersion Snmp SettingTrap Setting Trap Setting of Authentication Error53 E Troubleshooting 55 E TroubleshootingNProduct Specifications SpecificationsSpecifications NDimensional Drawings57 E Dmpm Digital Monitor Power Management Specifications NPower managementNDDC plug and play NCompatible signal timing AV Specifications NCompatible signal timing PC59 E NRS-232C input terminal pins NPC/AV D-sub input terminal pinsNDisplayPort input terminal pins 61 E NDVI-D output terminal pinsNDisplayPort output terminal pins Specifications NRS-232C output terminal pinsMounting Precautions For Sharp dealers and service engineers PN-R703R603 Mu EN12M1
Related manuals
Manual 63 pages 20.43 Kb Manual 28 pages 3.2 Kb

PN-R703, PN-R603 specifications

The Sharp PN-R603 and PN-R703 are advanced commercial display monitors designed to deliver high-quality visuals and reliable performance for a variety of applications. These models are part of Sharp’s professional display lineup, making them ideal for environments such as retail stores, conference rooms, and control centers.

One of the standout features of the PN-R603 and PN-R703 is their exceptional image quality. Both models utilize Sharp’s innovative LCD technology, which ensures stunning color reproduction and clarity. With a native resolution of 1920 x 1080 pixels, these displays present clear, detailed images that are perfect for showcasing videos, presentations, or advertising content. The brightness of up to 700 cd/m² ensures visibility even in well-lit environments, making them practical for almost any setting.

Both models incorporate an ultra-slim design, allowing for seamless integration into any environment. Whether mounted on walls or placed on stands, the PN-R603 and PN-R703 maintain an elegant profile that enhances their surroundings. The frameless bezel design further maximizes the viewing area, creating an immersive experience for users.

In terms of connectivity, these displays offer a comprehensive suite of options. HDMI, DisplayPort, and VGA inputs facilitate quick and easy connections to various devices, including computers, media players, and video conferencing systems. This flexibility enables users to seamlessly switch between different formats and sources without hassle.

The PN-R603 and PN-R703 are not just visually appealing; they are also designed for durability and reliability. With a robust construction that supports continuous operation, these displays are well-suited for 24/7 use, making them ideal for mission-critical applications. The built-in cooling system ensures optimal performance while minimizing the risk of overheating, thus extending the lifespan of the units.

Additionally, both models come equipped with essential features such as integrated USB media playback, allowing users to display content directly from USB drives without requiring a connected PC. This feature streamlines the process of sharing information and makes setting up presentations easier.

In summary, the Sharp PN-R603 and PN-R703 exhibit a host of features that cater to the needs of professional environments. From their stunning display quality and versatile connectivity options to their durable construction and ease of use, these monitors represent a robust solution for businesses looking to enhance their visual communications. Whether for advertising, presentations, or information displays, the PN-R603 and PN-R703 stand out as reliable and effective choices.