Sharp PN-R703 29 E, NDual screen display, Menu Items NEnlarge, NZOOM2 Special Setting, Pip

nDual screen display

You can display two screens simultaneously.

Set this function with PIP MODES of PIP/PbyP in the MULTI/ PIP menu.

PIP				A sub screen is displayed
	Main screen			inside a main screen.
		Sub
		screen
PbyP				A main screen and a sub
	Main		Sub	screen are displayed in a
				line.
	screen	screen
PbyP2				Displays a main screen
				which measures 1280
			Sub
	Main screen			pixels in the longest
			screen
				direction and a sub
				screen in a line.

*The currently selected input signal is displayed on the main screen.

*The following combinations are available for display: DisplayPort - HDMI1 or HDMI2

DisplayPort - D-SUB[RGB] DisplayPort - D-SUB[COMPONENT] DisplayPort - D-SUB[VIDEO] DVI-I - HDMI1 or HDMI2

DVI-I - D-SUB[COMPONENT] DVI-I - D-SUB[VIDEO]

TIPS

•You might infringe on a copyright of the author which is protected by copyright law when you display the images of the computer screen and television/VCR simultaneously for profit-making or to show the image to the public.

•The screen size for dual-screen display is the same as the screen size for single-screen display. The Dot by Dot screen is displayed in NORMAL size except when it is set as the PIP main screen.

•When dual-screen display is selected, the SCREEN

MOTION function is disabled.

•When dual-screen display is selected, the AUTO INPUT

CHANGE function is disabled.

•When dual-screen display is selected, the screen cannot be enlarged.

•When dual-screen display is selected, the INPUT SELECT options cannot be set.

•When an interlaced signal (1080i, 480i, video) is input to the sub screen, horizontal lines may flicker. If this happens, display the image on the main screen.

Menu Items

nEnlarge

•You can align several monitors and integrate them into a single large screen to display.

•Up to 5 monitors can be aligned in both the horizontal and vertical directions.

•Each monitor displays enlarged views of separated images.

(Example)

Horizontal direction: 2 monitors

Vertical direction: 2 monitors

Horizontal direction: 3 monitors

Vertical direction: 2 monitors

Setting procedure

Set using MULTI in the MULTI/PIP menu.

1.Set ENLARGE to ON.

2.Select ADVANCED (ENLARGE).

3.Set the number of monitors aligned in the horizontal direction in ENLARGE H.

4.Set the number of monitors aligned in the vertical direction in ENLARGE V.

5.Set the section of the separated image to be displayed on each monitor in ENLARGE-POS.

1)Press ENTER.

2)Press , , or to select position, then press MENU.

TIPS

•When Enlarge is used, the SCREEN MOTION function is disabled.

•When Enlarge is used, the AUTO INPUT CHANGE function is disabled.

•When Enlarge is used, the HDMI AUTO VIEW function is disabled.

nZOOM2 SPECIAL SETTING

If you connect a laptop computer with any of the following screen resolutions and black bands appear around the screen, set ZOOM2 SPECIAL SETTING of INPUT SIGNAL on the OTHERS menu to ON and then select ZOOM2 in the SIZE setting.

This displays the area inside the black band.

Laptop computer	Corresponding signal*1
resolution
1280x800	1280x1024, 1280x960, 1400x1050*2
1280x600	1280x720
1024x600	1024x768

*1: This setting is effective only when the screen resolution, including the black band, is one of the resolutions listed above.

*2: Use the automatic screen adjustment.

29 E