Sharp User Manual for Computer Monitors: Power Management for PN-R603 and PN-R703

Page 16

Turning Power On/Off

Caution

•Turn on the monitor first before turning on the PC or playback device.

Turning on the main power

Main power switch

Caution

•The main power must be turned on/off with the main power switch. Do not connect/disconnect the power cord or turn the breaker on/off while the main power switch is on.

•When switching the main power switch or the POWER button off and back on, always wait for at least 5 seconds.

•For a complete electrical disconnection, pull out the main plug.

Turning power on/off

Press the POWER button or POWER switch to turn the power ON/OFF.

	Power switch Power LED

Status	Status of the monitor
Green lit	Power on

Orange lit	Power off (Standby mode)

Green flashing	Input signal waiting mode

It is possible to check the power LED even when the operation panel is stored inside the monitor.

Power LED

Caution

•When switching the main power switch or the POWER button off and back on, always wait for at least 5 seconds. A short interval may result in a malfunction.

TIPS

•When the main power switch is off, the monitor cannot be turned on.

•If the monitor is in the input signal standby mode and you press the POWER button on the remote control unit, the monitor enters standby mode.

•Setting the SCHEDULE flashes the power LED alternately in red and orange in standby mode.

•To disable the logo screen from displaying when turning the power ON, set LOGO SCREEN to OFF on the OTHERS menu. (See page 28.)

E16

Image 16

Contents PN-R703 PN-R603 Model No Serial No A. onlyRefer Servicing to Qualified Service Personnel Important InformationDear Sharp Customer Safety Precautions Tips and Safety Instructions Necessary to replace the LED backlightFor the monitor in landscape orientation For the monitor in portrait orientationContents Supplied ComponentsNFront view Part NamesNRear view Part Names NRemote control unit Signal transmitterPower button See Mute button See Return button See Size button See11 E Connecting Peripheral EquipmentConnection with a PC or AV equipment Connecting Peripheral Equipment Connecting the Power Cord 13 EBinding Cables Cable Cable clamp attachmentPreparing the Remote Control Unit Installing the batteriesRemote control operation range 15 ETurning Power On/Off Turning on the main powerTurning power on/off Main power switchDisabling power on/off operations NDate/time settingTurning Power On/Off 17 EBasic Operation Basic Operation NSwitching the screen size 19 EWide Zoom Normal Dot by DotMenu Items Displaying the menu screenNExample of operation NMenu screen display21 E Menu item detailsMenu Items NSCREENMenu Items NPICTURE 23 E Advanced3D-Y/C D-SUBVIDEO Display Color PatternNSETUP Menu Items NAUDIO25 E Menu Items NMONITOR 27 E Menu Items NMULTI/PIPMenu Items NOTHERS NZOOM2 Special Setting 29 ENDual screen display Menu Items NEnlargePower Menu Items NSCHEDULEDAY of the Week InputAdjustments for PC screen display NAutomatic adjustmentNScreen display for adjustment 31 EALL Reset Adjustment LockAdjustment Lock Target Temperature AlertCommunication procedure Controlling the Monitor with a PC RS-232C33 E PC connectionNCommunication interval NID numbers35 E Wait ←Setting of the Gamma user data RS-232C command table Power control/Input mode selectionHow to read the command table 37 EControlling the Monitor with a PC RS-232C Screen menu Picture menu39 E Audio menuControlling the Monitor with a PC RS-232C Setup menu 41 E Controlling the Monitor with a PC RS-232C Monitor menuControlling the Monitor with a PC RS-232C MULTI/PIP menu Image Position Epos settingLandscape orientation Portrait orientation 43 E Others menuCommands for setting of the Gamma user data OthersSettings to connect to a LAN Controlling the Monitor with a PC LAN45 E To set on the monitorDefault Gateway 0.0 Controlling the Monitor with a PC LAN To set from a PC47 E Controlling with a PCControlling the Monitor with a PC LAN Basic operationStandby mode, Power on is the operation available Information about this monitor appearsUser Name / Password 49 EDNS Server Address Auto Acquisition DNS ServerInstallation Information NAME/LOCATION Link ModeAuthentication Account Name / Password51 E Recipient E-MAIL AddressesCondition ConfirmationSnmp Setting Trap SettingTrap Setting of Authentication Error Version53 E Troubleshooting Troubleshooting 55 ESpecifications NProduct SpecificationsSpecifications NDimensional Drawings57 E Dmpm Digital Monitor Power Management Specifications NPower managementNDDC plug and play NCompatible signal timing AV Specifications NCompatible signal timing PC59 E NRS-232C input terminal pins NPC/AV D-sub input terminal pinsNDisplayPort input terminal pins NDVI-D output terminal pins NDisplayPort output terminal pinsSpecifications NRS-232C output terminal pins 61 EMounting Precautions For Sharp dealers and service engineers PN-R703R603 Mu EN12M1

Related manuals

Manual 63 pages 20.43 Kb

Manual 28 pages 3.2 Kb