Overview
1 | 2 | 3 | Rear / Bottom View |
|
4 | 5 | 6 | 7 |
8 | 9 | 8 |
1.Connector Panel
See “Connector Panel” on page 14.
2.AC Power IN Socket
3.AC Power Switch
4.Runco Logo
Can be rotated to match floor or ceiling installation.
See “Runco Logo” on page 14.
5.Cable Opening
Pass cables through this opening.
6.Cable Access Door
Open to access connectors.
See “Connector Panel” on page 14.
7.Lamp Module Cover
Remove this cover when replacing the lamp. See “Lamp Replacement” on page 45.
8.Front / Rear Adjusters Adjusts the height or projection angle.
9.Ceiling Mount Holes
The connecting holes for the ceiling mount bracket.
Runco | 11 |