Runco CL-810 manual Enter

				Use the ICC Adjust controls to customize the stored NTSC,
	ICC Adjust
				HDTV and/or PAL color space characteristics. To do this,
Color		NTSC
				select the color space to modify. Then, select a component
R G	B	Y C	M	color (Red, Green, Blue, Yellow, Cyan or Magenta).
Intensity		+100		For each component color, you can adjust the following:
Sat.		+100		Intensity: This slidebar adjusts the intensity -- also known
Hue	M	C	0
				as luminance -- of a given color.
Store Setting				Sat.: This slidebar adjusts the color saturation level -- the
				amount of that color in a video image. Lower settings
				produce less saturated colors; a setting of “0” removes that

color from the image entirely. If the saturation is too high, that color will be overpowering and unrealistic.

Hue: This slidebar adjusts the red/green color hue for true color reproduction of video signals. For best results, adjust tint while displaying an external color bars test pattern. Otherwise, it is recommended that Hue remain at its default setting.

When you have finished customizing the color space, select Store Setting and press

Enter.

➤

ICC Adjust

Store Settings

Memory 1

ISF Night

ISF Day

Splash Screen Timer +20 +

ISF Enable

>Off On

When you have finished calibration, select Store Settings	➤ Store Settings
and choose “Memory 1,” “ISF Night“ or “ISF Day” to store
your settings.
To recall stored custom image quality settings, select Restore
Image Settings from the Adjustment menu (refer to “Picture
Quality Adjustments,” earlier in this section) and choose
“Memory 1,” “ISF Night“ or “ISF Day.” Or, simply use the
corresponding buttons on the remote control.
Press the ◄ or ► arrows to set the Splash Screen Timer.	➤ Splash Screen Timer
This timer controls how long the startup (ISF and Runco
logo) image stays on-screen after you turn on the projector.
Select from 5 to 60 seconds, in 1-second increments. When
finished, press Exit.
Use ISF Enable to control the display of the ISF logo on the	➤ ISF Enable
CL-810 splash screen upon power-up.

CALIBRATED FOR:

CUSTOM BUILT BY:

Runco CL-810 Owner’s Operating Manual 45