Runco CL-810 manual Return to User OSD

On-Screen Display Menus

Fan Control Mode

Fan Speed

Fan Control

>Auto Normal Auto Hi. Altitude Manual

Fan Speed +2

Select Fan Control from the Set Up Menu to control the operation of the projector’s cooling fan.

Mode: In most cases, the default Fan Control Mode (Auto Normal) will maintain the correct operating temperature. If the lamp frequently turns off due to overheating, or in certain high-altitude operating environments, you may need to change this setting to Auto Hi. Altitude or Manual.

Fan Speed: If you set the Fan Mode to Manual, select Fan Speed and use the on-screen slidebar to adjust the speed.

After changing either of these settings, press Exit to return to the previous menu.

➤

Fan Control

Set Up

White Balance

Gamma Selection

SD Enhance

RVR Adjust

Image Over Scan

Image Shift

Amplitude Adjust

Video Black Level

Lamp Power

Remote Control

Reset Lamp Timer

Fan Control

Return to User OSD

To exit the Set Up menu, use the up- or down-arrow keys to highlight Return to User OSD and press Enter.

To return to the Set Up menu, select it from the Main Menu, press Enter twice, then press MENU on the remote control. (You do not need to re-enter the passcode.)

➤

Return to User OSD

Runco CL-810 Owner’s Operating Manual 43