Runco CL-810 manual Language Picture Orientation

On-Screen Display Menus

Language ➤

Picture Orientation ➤

Press the ▲ or ▼ arrows to select from the available Languages: English, French, Spanish, German and Italian.

Press the ▲ or ▼ arrows to select the projector’s Picture Orientation. The projector can be installed on a ceiling or in a rear-screen configuration with one or more mirrors. There are four settings: Floor Front, Ceiling Front, Floor Rear and Ceiling Rear.

Language

>English Francais Espanol Deutsch Italiano

Picture Orientation

>Floor Front Ceiling Front Floor Rear Ceiling Rear

Keystone Adjust ➤

Background Color ➤

To correct distortion resulting from the angle of the projection, select Keystone Adjust and use the ◄ or ► arrows to make the image rectangular.

NOTE: Runco recommends that the keystone feature not be used unless absolutely necessary, as it may cause artifacts in the image.

Press the ▲ or ▼ arrows to select the image Background Color (blue or white). The Background Color appears when no incoming signal is present.

Keystone Adjust

- 0

Background Color

>Blue White

RS-232 Baud Rate ➤ Press the ▲ or ▼ arrows to select the projector’s RS-232 Baud Rate. This function is used to change the transfer rate of the RS-232 connection. (This setting must match the data rate of the device connected to the RS-232 input.)

Blue Image ➤ Press the ▲ or ▼ arrows to turn the Blue Image Off or On. This feature removes all red and green color information from the image, and is useful for color-calibrating the projector or other video components.

RS-232 Baud Rate

>9600

38400

115200

Blue Image

>Off On

36 Runco CL-810 Owner’s Operating Manual