Vizio TL-WR641G manual IP parameters should have been provided by your ISP

TL-WR641G

108M Wireless Router User Guide

Figure 3-8

)Note:

The IP parameters should have been provided by your ISP.

¾IP Address - This is the WAN IP address as seen by external users on the Internet (including your ISP). Enter the IP address into the field.

¾Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually 255.255.255.0

¾Default Gateway - Enter the gateway IP address into the box if required.

¾Primary DNS - Enter the DNS Server IP address into the boxes if required.

¾Secondary DNS - If your ISP provides another DNS server, enter it into this field.

After you complete the above, click Next, the Wireless settings page will appear, shown in Figure 3-9.

Figure 3-9

In this page, you can configure the following wireless parameters:

¾Wireless Radio - Indicates whether the Access Point feature of the router is enabled or disabled. If disabled, the WLAN LED on the front panel will not be lit and the wireless stations will not be able to access the router. If enabled, the WLAN LED will be lit up and wireless stations will be able to access the router.

¾SSID - Enter a value of up to 32 characters. The same SSID must be assigned to all wireless devices on your network. The default SSID is TP-LINK. This value is case-sensitive. For example, TP-LINKis NOT the same as tp-link.

- 11 -