Vizio TL-WR641G manual IP & MAC Binding Setting

Page 61

TL-WR641G

108M Wireless Router User Guide

port. The default is disabled. If enabled, the ping packet from the Internet cannot access the router.

¾Forbid Ping Packet from LAN Port - Enable or Disable forbidding Ping Packet to access the router from the LAN port. The default value is disabled. If enabled, the ping packet from the LAN port cannot access the router. (Defends against some viruses)

Click the Save button to save the settings.

Click the Blocked DoS Host Table button to display the DoS host table by blocking. The page will appear that shown in Figure 4-48:

Figure 4-48

This page shows Host IP Address and Host MAC Address for each host blocked by the router.

¾Host IP Address- The IP address that blocked by DoS are displayed here.

¾Host MAC Address - The MAC address that blocked by DoS are displayed here.

To update this page and to show the current blocked host, click on the Refresh button.

Click the Clear All button to clear all displayed entries. After the table is empty the blocked host will regain the capability to access Internet.

Click the Return button to return to the Advanced Security page

4.9IP & MAC Binding Setting

Figure 4-49

There are two submenus under the IP &MAC Binding menu (shown in Figure 4-49):Binding Setting and ARP List. Click any of them, and you will be able to scan or configure the corresponding function. The detailed explanations for each submenu are provided below.

4.9.1 Binding Setting

This page displays the IP & MAC Binding Setting table; you can operate it in accord with your desire. (shown in Figure 4-50).

- 53 -

Image 61
Contents TL-WR641G Copyright & Trademarks FCC Statement National Restrictions Page Package contents Contents 11.1 Overview of the Router FeaturesFront Panel Panel LayoutLEDs description Rear PanelIndication ¾ Wireless antenna ¾ Reset buttonConnecting the Router Installation Environment RequirementsSystem Requirements Power on your PC and Cable/DSL Modem TCP/IP configuration Quick Installation GuidePlease check the connection following these steps Quick Installation Guide TL-WR641G IP parameters should have been provided by your ISP TL-WR641G Status LoginQuick Setup 1 LAN Network2 WAN TL-WR641G TL-WR641G TL-WR641G TL-WR641G TL-WR641G TL-WR641G QLD qld.bigpond.net.au NSW / ACT nsw.bigpond.net.auTL-WR641G TL-WR641G TL-WR641G MAC Clone Wireless Settings WirelessTL-WR641G TL-WR641G TL-WR641G TL-WR641G MAC Filtering TL-WR641G TL-WR641G Wireless Statistics Dhcp Dhcp SettingsAddress Reservation Dhcp Clients ListTo Reserve IP addresses Forwarding To setup a virtual server entryVirtual Servers TL-WR641G Port Triggering TL-WR641G UPnP 3 DMZFirewall SecurityIP Address Filtering TL-WR641G Domain Filtering TL-WR641G MAC Filtering TL-WR641G Advanced Security Remote ManagementTL-WR641G Binding Setting IP & MAC Binding SettingTo modify or delete an existing entry To add IP & MAC Binding entriesTo find an existing entry ARP List To add static routing entries Static RoutingDyndns.org Ddns DdnsComexe.cn Ddns Oray.net DdnsSystem Tools Time Select using daylight saving timeFirmware Factory DefaultsReboot Backup and Restore12.7 Log PasswordStatistics TCP ¾ Statistics TableAppendix a FAQ Want to use Netmeeting, what do I need to do? Figure A-3Want to build a WEB Server on the LAN, what should I do? Figure A-5Figure A-8 Wireless stations cannot connect to the routerInstall TCP/IP component Appendix B Configuring the PCShown in the Figure below ¾ Setting IP address manually TL-WR641G Environmental and Physical GeneralAppendix D Glossary TL-WR641G