Vizio TL-WR641G manual Wireless Statistics

Page 43

TL-WR641G

108M Wireless Router User Guide

Figure 4-21

)Note:

1)If you select the radio button Allow the stations not specified by any enabled entries in the list to access for Filtering Rules, the wireless station B will still not be able to access the router, however, other wireless stations that are not in the list will be able to access the router.

2)If you enable the function and select the Deny the stations not specified by any enabled entries in the list to access for Filtering Rules, and there are not any enable entries in the list, thus, no wireless stations can access the router.

4.5.3 Wireless Statistics

This page shows MAC Address, Current Status, Received Packets and Sent Packets for each connected wireless station.

Figure 4-22

¾MAC Address - The connected wireless station's MAC address

¾Current Status - The connected wireless station's running status, one of STA-AUTH / STA-ASSOC / AP-UP / WPA / WPA-PSK /WPA2/WPA2-PSK/None

¾Received Packets - Packets received by the station

¾Sent Packets - Packets sent by the station

You cannot change any of the values on this page. To update this page and to show the current connected wireless stations, click on the Refresh button.

If the numbers of connected wireless stations go beyond one page, click the Next button to go to the next page and click the Previous button to return the previous page.

)Note:

This page will be refreshed automatically every 5 seconds.

- 35 -

Image 43
Contents TL-WR641G Copyright & Trademarks FCC Statement National Restrictions Page Package contents Contents 11.1 Overview of the Router FeaturesFront Panel Panel LayoutLEDs description Rear PanelIndication ¾ Wireless antenna ¾ Reset buttonConnecting the Router Installation Environment RequirementsSystem Requirements Power on your PC and Cable/DSL Modem TCP/IP configuration Quick Installation GuidePlease check the connection following these steps Quick Installation Guide TL-WR641G IP parameters should have been provided by your ISP TL-WR641G Status LoginQuick Setup 1 LAN Network2 WAN TL-WR641G TL-WR641G TL-WR641G TL-WR641G TL-WR641G TL-WR641G QLD qld.bigpond.net.au NSW / ACT nsw.bigpond.net.auTL-WR641G TL-WR641G TL-WR641G MAC Clone Wireless Settings WirelessTL-WR641G TL-WR641G TL-WR641G TL-WR641G MAC Filtering TL-WR641G TL-WR641G Wireless Statistics Dhcp Dhcp SettingsAddress Reservation Dhcp Clients ListTo Reserve IP addresses Forwarding To setup a virtual server entryVirtual Servers TL-WR641G Port Triggering TL-WR641G UPnP 3 DMZFirewall SecurityIP Address Filtering TL-WR641G Domain Filtering TL-WR641G MAC Filtering TL-WR641G Advanced Security Remote ManagementTL-WR641G Binding Setting IP & MAC Binding SettingTo modify or delete an existing entry To add IP & MAC Binding entriesTo find an existing entry ARP List To add static routing entries Static RoutingDyndns.org Ddns DdnsComexe.cn Ddns Oray.net DdnsSystem Tools Time Select using daylight saving timeFirmware Factory DefaultsReboot Backup and Restore12.7 Log PasswordStatistics TCP ¾ Statistics TableAppendix a FAQ Want to use Netmeeting, what do I need to do? Figure A-3Want to build a WEB Server on the LAN, what should I do? Figure A-5Figure A-8 Wireless stations cannot connect to the routerInstall TCP/IP component Appendix B Configuring the PCShown in the Figure below ¾ Setting IP address manually TL-WR641G Environmental and Physical GeneralAppendix D Glossary TL-WR641G