Vizio TL-WR641G manual

TL-WR641G

108M Wireless Router User Guide

¾Get IP with Unicast DHCP - A few ISPs' DHCP servers do not support the broadcast applications. If you cannot get the IP Address normally, you can choose this option. (This is rarely required.)

2.If you choose Static IP, you should have fixed IP Parameters specified by your ISP. The Static IP settings page will appear, shown in Figure 4-5:

Figure 4-5

You should type the following parameters into the spaces provided:

¾IP Address - Enter the IP address in dotted-decimal notation provided by your ISP.

¾Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP, usually is 255.255.255.0.

¾Default Gateway - (Optional) Enter the gateway IP address in dotted-decimal notation provided by your ISP.

¾MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. For some ISPs you may need to modify the MTU. But this is rarely required, and should not be done unless you are sure it is necessary for your ISP connection.

¾Primary DNS - (Optional) Enter the DNS address in dotted-decimal notation provided by your ISP.

¾Secondary DNS - (Optional) Type another DNS address in dotted-decimal notation provided by your ISP if provided.

3.If you choose PPPoE, you should enter the following parameters (Figure 4-6):

- 17 -