D-Link DES-1228 user manual Ports 1 ~ 24 Status LEDs Link/Act, 100Mbps

Page 21

Ports 1 ~ 24 Status LEDs

Link/Act

On

When the Link/Act LED light is on, the respective port is

 

successfully connected to an Ethernet network.

 

 

Blinking

When the Link/Act LED is blinking, the port is

 

transmitting or receiving data on the Ethernet network.

 

 

Off

No link.

 

 

100Mbps

 

 

 

On

When the 100Mbps LED light is on, the respective port

 

is connected to a 100Mbps Fast Ethernet network.

 

 

Off

When the respective port is connected to a 10Mbps

 

Ethernet or no link.

 

 

Option Ports 25~26 10/100/1000 Base-T / Mini-GBIC Status LEDs FX Link

On

When the FX Link LED light is on, the respective port is

 

connected to a 100 or 1000Mbps Gigabit Ethernet

 

network.

 

 

Off

No link or linking the copper ports.

 

 

16

Image 21
Contents DES-1228 Table of Contents Page Iii Page Terms/Usage PurposeIntroduction Gigabit Ethernet TechnologyFast Ethernet Technology Switching TechnologyIEEE802.1X Port-based Access Control FeaturesKey Components / Performance Switching Capacity Technical SpecificationsForwarding Mode Max. Forwarding RateFlash Memory Sdram for CPUPort Functions Front panelReset button on Chassis Dimensions1000Mbps Copper Ports in the frontPower consumption Temperature Storage TemperatureEmission EMI and Safety Certifications AC inputUnpacking InstallationAttach the adhesive rubber pads to the bottom Rack MountingAttach the mounting brackets to the Switch Connecting Network CableAC Power LED Indicator Reset buttonFront Panel 10/100 BASE-TX Twisted Pair Ports Port 1~24AC Power Connector Rear Panel10/100/1000 BASE-T Twisted Pair Ports Port 27~28 Understanding LED Indicators Power and System LEDsPower LEDs 100Mbps Ports 1 ~ 24 Status LEDs Link/ActPorts 27~28 10/100/1000 Base-T LEDs Link/Act 1000MbpsWhen the 1000Mbps LED light is on, the respective port Supported web browsers Installing the SmartConsole UtilityMenu Toolbar SmartConsole Utility FeaturesOption includes Refresh Time and Group Interval functions Discovery List Definitions of the Discovery List featuresDefinitions of the Monitor List functions and terms Monitor ListView trap This space has been intentionally reserved for notes Device SettingFirmware Upgrade Web-based Management LoginLog in screen Tool Menu Tool MenuTool Menu Firmware Backup and Upload Setup MenuC P System System SettingSystem System Setting System Trap SettingSystem Trap Setting System Port SettingSystem Port Setting System Snmp Setting System Snmp Setting Configuration 802.1Q Vlan System Password Access ControlConfiguration 802.1Q Vlan Default Setting Configuration 802.1Q Vlan Add VID Configuration Igmp Snooping Configuration TrunkingConfiguration Igmp Snooping Configuration Page Page Configuration Igmp Router port Settings Configuration Spanning Tree Configuration 802.1D Spanning TreePage Configuration Port Mirroring Configuration Port MirroringQoS 802.1p Default Priority QoS 802.1p Default PrioritySecurity Safeguard Engine Security 802.1X SettingSecurity Broadcast Storm Control Security 802.1X Setting Page Security Static Mac Address Security Mac Address Table Static MacSecurity Dynamic Forwarding Table Security Mac Address Table Dynamic Forwarding TableMonitoring Statistics Monitoring StatisticsMonitoring Port Statistics