D-Link DES-1228 user manual Web-based Management, Login

Page 32

Web-based Management

The DES-1228 Web-Smart Switch has a web browser GUI interface for configuring the Switch through a web browser. To see the list of web browsers the Web-based Utility supports, see Supported web browsers on page 19. A network administrator can manage, control and monitor the switch from the local LAN. This section indicates how to configure the Switch to enable its smart functions.

Login

In order to login and configure the switch via an Ethernet connection, the PC must have an IP address in the same range as the switch. For example, if the switch has an IP address of 192.168.0.1, the PC should have an IP address of 192.168.0.x (where x is a number between 2 and 254), and a subnet mask of 255.255.255.0. Open your web browser and enter http://192.168.0.1 (the factory-default IP address) in the address box. Then press <Enter> (Figure 14)

Figure 14 – Logging into the Switch’s (DHCP assigned) IP address

The web configuration can also be accessed through the SmartConsole Utility. Open the SmartConsole Utility and double-click the switch as it appears in the Monitor List. This will automatically load the web configuration in your web browser.

When the following logon box appears, enter "admin" for the password. Press Ok to enter the main configuration window. (Figure 15)

27

Page 31 Page 33
Image 32
Page 31 Page 33
Contents DES-1228 Table of Contents Page Iii Page Purpose Terms/UsageGigabit Ethernet Technology IntroductionSwitching Technology Fast Ethernet TechnologyFeatures IEEE802.1X Port-based Access ControlTechnical Specifications Key Components / Performance Switching CapacityForwarding Mode Max. Forwarding RateSdram for CPU Flash MemoryPort Functions Front panelChassis Dimensions Reset button on1000Mbps Copper Ports in the frontTemperature Storage Temperature Power consumptionEmission EMI and Safety Certifications AC inputInstallation UnpackingRack Mounting Attach the adhesive rubber pads to the bottomConnecting Network Cable Attach the mounting brackets to the SwitchAC Power Reset button LED IndicatorFront Panel 10/100 BASE-TX Twisted Pair Ports Port 1~2410/100/1000 BASE-T Twisted Pair Ports Port 27~28 AC Power ConnectorRear Panel Power LEDs Understanding LED IndicatorsPower and System LEDs Ports 1 ~ 24 Status LEDs Link/Act 100Mbps1000Mbps Ports 27~28 10/100/1000 Base-T LEDs Link/ActWhen the 1000Mbps LED light is on, the respective port Installing the SmartConsole Utility Supported web browsersSmartConsole Utility Features Menu ToolbarOption includes Refresh Time and Group Interval functions Definitions of the Discovery List features Discovery ListMonitor List Definitions of the Monitor List functions and termsView trap Device Setting This space has been intentionally reserved for notesFirmware Upgrade Login Web-based ManagementLog in screen Tool Menu Tool MenuSetup Menu Tool Menu Firmware Backup and UploadSystem System Setting C PSystem Trap Setting System System SettingSystem Port Setting System Trap SettingSystem Port Setting System Snmp Setting System Snmp Setting System Password Access Control Configuration 802.1Q VlanConfiguration 802.1Q Vlan Default Setting Configuration 802.1Q Vlan Add VID Configuration Trunking Configuration Igmp SnoopingConfiguration Igmp Snooping Configuration Page Page Configuration Igmp Router port Settings Configuration 802.1D Spanning Tree Configuration Spanning TreePage Configuration Port Mirroring Configuration Port MirroringQoS 802.1p Default Priority QoS 802.1p Default PrioritySecurity Broadcast Storm Control Security Safeguard EngineSecurity 802.1X Setting Security 802.1X Setting Page Security Mac Address Table Static Mac Security Static Mac AddressSecurity Mac Address Table Dynamic Forwarding Table Security Dynamic Forwarding TableMonitoring Statistics Monitoring StatisticsMonitoring Port Statistics
Top Page Image Contents