D-Link DES-1228 user manual Option includes Refresh Time and Group Interval functions

Page 26

•Monitor Load: To manually load a Monitor List setting file.

•Exit: To exit the SmartConsole Utility.

View includes: View log and Clear Log functions, which provide trap setting list operations.

•View Log: To show the event of the SmartConsole Utility and the device.

•Clear Log: To clear all log entries.

Option includes: Refresh Time and Group Interval functions.

•Refresh time refreshes the monitoring time of the device. Choices include 15 secs, 30 secs, 1 min, 2 min and 5 min for selecting the monitoring time intervals.

•Group Interval establishes the intervals (in seconds) that the Web-Smart Switch will be discovered in the SmartConsole Utility Discovery List.

NOTE: If the Group Interval is set to 0, IGMP snooping must be disabled or else the Web-Smart Switch will not be discovered.

21

Image 26

Contents DES-1228 Table of Contents Page Iii Page Purpose Terms/UsageGigabit Ethernet Technology IntroductionSwitching Technology Fast Ethernet TechnologyFeatures IEEE802.1X Port-based Access ControlForwarding Mode Technical SpecificationsKey Components / Performance Switching Capacity Max. Forwarding RatePort Functions Sdram for CPUFlash Memory Front panel1000Mbps Copper Chassis DimensionsReset button on Ports in the frontEmission EMI and Safety Certifications Temperature Storage TemperaturePower consumption AC inputInstallation UnpackingRack Mounting Attach the adhesive rubber pads to the bottomConnecting Network Cable Attach the mounting brackets to the SwitchAC Power Front Panel Reset buttonLED Indicator 10/100 BASE-TX Twisted Pair Ports Port 1~2410/100/1000 BASE-T Twisted Pair Ports Port 27~28 AC Power ConnectorRear Panel Power LEDs Understanding LED IndicatorsPower and System LEDs Ports 1 ~ 24 Status LEDs Link/Act 100Mbps1000Mbps Ports 27~28 10/100/1000 Base-T LEDs Link/ActWhen the 1000Mbps LED light is on, the respective port Installing the SmartConsole Utility Supported web browsersSmartConsole Utility Features Menu ToolbarOption includes Refresh Time and Group Interval functions Definitions of the Discovery List features Discovery ListMonitor List Definitions of the Monitor List functions and termsView trap Device Setting This space has been intentionally reserved for notesFirmware Upgrade Login Web-based ManagementLog in screen Tool Menu Tool MenuSetup Menu Tool Menu Firmware Backup and UploadSystem System Setting C PSystem Trap Setting System System SettingSystem Port Setting System Trap SettingSystem Port Setting System Snmp Setting System Snmp Setting System Password Access Control Configuration 802.1Q VlanConfiguration 802.1Q Vlan Default Setting Configuration 802.1Q Vlan Add VID Configuration Trunking Configuration Igmp SnoopingConfiguration Igmp Snooping Configuration Page Page Configuration Igmp Router port Settings Configuration 802.1D Spanning Tree Configuration Spanning TreePage Configuration Port Mirroring Configuration Port MirroringQoS 802.1p Default Priority QoS 802.1p Default PrioritySecurity Broadcast Storm Control Security Safeguard EngineSecurity 802.1X Setting Security 802.1X Setting Page Security Mac Address Table Static Mac Security Static Mac AddressSecurity Mac Address Table Dynamic Forwarding Table Security Dynamic Forwarding TableMonitoring Statistics Monitoring StatisticsMonitoring Port Statistics