D-Link DES-1228 user manual Definitions of the Monitor List functions and terms

Page 28

DHCP: uses a client/server model to obtain lease of an IP address from a DHCP server as part of the network boot process.

Location: Shows the appointed description for the device location.

Trap IP: Shows the IP where the Trap information will be sent.

Subnet Mask: Shows the Subnet Mask set of the device.

Gateway: Shows the Gateway set of the device.

Group Interval: Shows the Group Interval of the device

Monitor List

All Web-Smart devices in the Monitor List can be monitored, with Trap information available to be received for monitoring status information of the device.

Definitions of the Monitor List functions and terms:

S:Shows the system symbol of the Web-Smart device, represents the device system is inactive.

IP Address: Shows the current IP address of the device.

MAC Address: Shows the device MAC Address.

Protocol version: Shows the version of the Utility protocol.

Product Name: Shows the device product name.

System Name: Shows the appointed device system name.

DHCP: uses a client/server model to obtain lease of an IP address from a DHCP server as part of the network boot process.

Location: Shows the appointed description for the device location.

Trap IP: Shows the IP where the Trap to be sent.

Subnet Mask: Shows the Subnet Mask set of the device.

Gateway: Shows the Gateway set of the device.

23

Image 28

Contents DES-1228 Table of Contents Page Iii Page Purpose Terms/UsageGigabit Ethernet Technology IntroductionSwitching Technology Fast Ethernet TechnologyFeatures IEEE802.1X Port-based Access ControlTechnical Specifications Key Components / Performance Switching CapacityForwarding Mode Max. Forwarding RateSdram for CPU Flash MemoryPort Functions Front panelChassis Dimensions Reset button on1000Mbps Copper Ports in the frontTemperature Storage Temperature Power consumptionEmission EMI and Safety Certifications AC inputInstallation UnpackingRack Mounting Attach the adhesive rubber pads to the bottomConnecting Network Cable Attach the mounting brackets to the SwitchAC Power Reset button LED IndicatorFront Panel 10/100 BASE-TX Twisted Pair Ports Port 1~24Rear Panel AC Power Connector10/100/1000 BASE-T Twisted Pair Ports Port 27~28 Power and System LEDs Understanding LED IndicatorsPower LEDs Ports 1 ~ 24 Status LEDs Link/Act 100Mbps1000Mbps Ports 27~28 10/100/1000 Base-T LEDs Link/ActWhen the 1000Mbps LED light is on, the respective port Installing the SmartConsole Utility Supported web browsersSmartConsole Utility Features Menu ToolbarOption includes Refresh Time and Group Interval functions Definitions of the Discovery List features Discovery ListMonitor List Definitions of the Monitor List functions and termsView trap Device Setting This space has been intentionally reserved for notesFirmware Upgrade Login Web-based ManagementLog in screen Tool Menu Tool MenuSetup Menu Tool Menu Firmware Backup and UploadSystem System Setting C PSystem Trap Setting System System SettingSystem Port Setting System Trap SettingSystem Port Setting System Snmp Setting System Snmp Setting System Password Access Control Configuration 802.1Q VlanConfiguration 802.1Q Vlan Default Setting Configuration 802.1Q Vlan Add VID Configuration Trunking Configuration Igmp SnoopingConfiguration Igmp Snooping Configuration Page Page Configuration Igmp Router port Settings Configuration 802.1D Spanning Tree Configuration Spanning TreePage Configuration Port Mirroring Configuration Port MirroringQoS 802.1p Default Priority QoS 802.1p Default PrioritySecurity 802.1X Setting Security Safeguard EngineSecurity Broadcast Storm Control Security 802.1X Setting Page Security Mac Address Table Static Mac Security Static Mac AddressSecurity Mac Address Table Dynamic Forwarding Table Security Dynamic Forwarding TableMonitoring Statistics Monitoring StatisticsMonitoring Port Statistics