Altinex MT104-100/103 manual Rsi, SIDnCi, Sid+

Page 15

MULTI-TASKER™

690-0122-019 = Version 019 or later.

690-0123-005 = Version 005 or later.

690-0124-019 = Version 019 or later.

NOTE: In MTSetup™, send the command [VER] from the Terminal Window. The system will respond with feedback similar to the following:

[690-0122-015 690-0123-005 690-0124-019]

Check the last three digits against the numbers above to determine if the Card ID commands can address all 99 Card ID's.

Some cards require more than one slot in the Multi-Tasker™ system. As an example, some matrix switcher cards require 4 slots. If there are 5 of these cards installed, they would be numbered C4, C8, C12, C16 and C20. Changing the Card ID allows the user to define the cards as C1, C2, C3, C4 and C5.

Another use for changing the Card ID is to be able to use multiple systems without having to set each unit to a different Unit ID. All systems may be left as Unit ID 0 for ease of programming. The cards in the first unit may be numbered 1-10 and in the second unit 11-20.

18.[RSI]

This command resets the card ID's in the system. After sending this command, each card ID in the system will match the slot number of the card. Use this command along with the SID commands that follow. The [RSI] command MUST be used prior to changing Card ID's once they have already been set.

Command Format: [RSI]

Example:

Send the command [RSI] to the system with Unit ID 0. The card in slot 1 will have ID 1, the card in slot 2 will have ID 2 and so on.

400-0082-005

14

19.[SIDn]

This command sets all the cards installed in the Multi-Tasker™ system to the same Card ID. After sending this command, all cards will be addressed with the same ID. Use caution when sending this command to a system with multiple board types.

Command Format: [SIDn]

n= Card ID (n = # from 1 to 99) Example:

Send the command [SID1] to the system. All the cards in the system now have ID 1. Any commands that are sent to Card ID 1 will be received and executed by each card.

20.[SIDnCi]

This command sets the Card ID of a single card to a number from 1 to 99.

Command Format: [SIDnCi]

n

= Card ID (n = # from 1 to 99)

Ci

= Slot Number (i = # from 1 to max slots)

Example:

Send the command [SID50C10] to set the ID of the card in slot #10 to an ID of 50.

21.[SID+]

This command sets the Card ID of all the cards in a system to their slot number plus the offset value.

Command Format: [SID+n]

n = Offset amount (n = # from 0 to 99)

The maximum Card ID is 99, so subtract the highest slot number from 99 to find the maximum offset. For example, in an 8 slot enclosure, the maximum offset would be 91. The slot number, 8, plus the offset, 91, equals 99.

14

Image 15
Contents MT104-100/103 Troubleshooting Guide General Precautions / Safety WarningsInstallation CleaningTechnical Specifications MT104-100/103Mechanical Electrical Description of MT104-100Diagram 1 Rgbhv Configuration Application DiagramsDiagram 2 C-VIDEO Configuration Diagram 3 Internal View RS-232 Control Installing Your MT104-100Description of Commands OperationCnS VERSTA ?CnOFF Path OptionExample Feedback OptionMULTI-TASKER CLR TestFBD SID+ RSISIDn SIDnCiRMC RSNHelp 24. WRRMG 27. RDCLM OFF Menu ModeMenu Command Definitions STASUB Menus Using Menu ModeMenu Types Main MenuESC Save this SETTING?Menu Mode Examples Current Selection this CardTroubleshooting Guide LED is not onLED is Blinking RED Limited WARRANTY/RETURN Policy Altinex PolicyNo Display

MT104-100/103 specifications

The Altinex MT104-100/103 is a versatile and technologically advanced line of multimedia switchers designed to meet the demands of modern presentation environments. This device enables seamless and efficient management of multiple audio and video sources, making it an ideal solution for conference rooms, classrooms, and other audio-visual settings.

One of the standout features of the MT104-100/103 is its ability to support various input and output configurations. With multiple HDMI, VGA, and audio inputs, it allows for easy connectivity of a wide range of devices, including laptops, projectors, and video conferencing equipment. This flexibility makes it an excellent choice for spaces that require frequent switching between different types of media.

The MT104-100/103 integrates advanced signal processing technologies to ensure high-quality distribution of video and audio signals. Utilizing 4K video resolution capabilities, it ensures that presentations and media display in stunning clarity, supporting the latest high-definition formats. Additionally, the device employs advanced digital signal processing (DSP) to enhance audio quality, providing clear sound across all connected devices.

Another notable characteristic is the user-friendly interface. The MT104-100/103 includes an intuitive control panel that enables quick and easy switching between sources. Furthermore, it can be integrated with existing control systems, offering compatibility with RS-232, TCP/IP, and infrared control for remote management. This makes it adaptable to a variety of environments and user preferences.

Built-in features such as auto-switching and signal sensing optimize performance by automatically detecting which input source is active, simplifying the operator’s workflow. Furthermore, the MT104-100/103 is designed for reliability and resilience, ensuring stable performance during critical presentations.

In terms of physical design, the device boasts a compact and rack-mountable form factor, allowing for easy installation in AV racks or cabinets. The rugged construction guarantees durability, catering to the rigors of frequent use in professional settings.

In summary, the Altinex MT104-100/103 multimedia switcher is a robust and flexible solution tailored for high-performance AV applications. Its array of features, including support for high-resolution video, comprehensive connectivity options, and advanced user experience capabilities, positions it as a top choice for anyone looking to enhance their audio-visual management capabilities.