ABOUT YOUR MT104-100/103 | 2 |
MT104-100 & MT104-103
6-in 1-out MT Switcher Cards
The MT104-100and MT104-103are 6-in 1-out Video Switcher Cards. These MT Video SW cards enable 6 composite video sources to be connected and switched to a single display or recording device. The MT104-100can be used together with one or two Video SW Expansion Cards for up to 22 inputs. See the MT104-101product sheet for more information.
Multiple MT Video SW series cards can be installed into a Multi-Tasker™ enclosure to provide additional functionality. For example, two MT Video SW cards can be used to handle the two components of an S-Video signal (Chroma and Luma). In order to create a component video switcher, simply install three of the MT Video SW cards, one each for the Y, Pr, and Pb (or Y, R-Y, B-Y) signal components. Similarly, the MT Video SW series cards can also be used to pass computer video signals: 4 cards for RGBS and 5 for RGBHV.
The MT Video SW cards utilize solid state switching technology, and offer the ability to pass VGA thru UXGA high-resolution video signals without degradation. Inputs are selected via easy- to-use ASCII commands from a control system or computer connected to the RS-232 port of a Multi-Tasker™ enclosure. Also available through ASCII control is “on-off” output control.
Additionally, by special order you can have VIS (Vertical Interval Switching) capability added. This is a feature that eliminates the "glitch" normally associated with composite video switching.
| TECHNICAL SPECIFICATIONS | 3 | | |
| | | | | | |
| FEATURES/ | | MT104-100/103 | | | |
| DESCRIPTION | | | | | |
| GENERAL | | | | | |
| Inputs | | | | | |
| External Connectors | (6) BNC Female (Analog | |
| | Video or TTL Sync) | | | |
| | | | | |
| Internal Connectors | (2) 10-pin IDC Connectors | |
| Outputs | | | | | |
| Output Connector | (1) BNC Female (Analog | |
| | Video or TTL Sync) | | | |
| | | | | |
| Capability | | | | | |
| Using 1 Card | | Composite Video | | | |
| Using 2 Cards | | S-Video (Y/C) | | | |
| Using 3 Cards | Component Video, RGsB, | |
| | & RsGsBs | | | |
| | | | | |
| Using 4 Cards | | RGBS | | | |
| Using 5 Cards | RGBHV, VGA thru UXGA* | |
| Approvals | | CE/FCC | | | |
| Expandability | | | | | |
| MT104-100 | Up to 2 expansion cards. | |
| MT104-103 | | Not expandable | | | |
| Table 1. MT104-100/103 | General | | | |
| | | | | | |
| MECHANICAL | | MT104-100/103 | | | |
| Enclosure Slots Required | | One | | | |
| Weight | | 0.43lb (0.19kg) | | | |
| Shipping Weight | | 1 lb. (0.45kg) | | | |
| Connector Panel | | Black | | | |
| T° Operating | | 10°C to 40°C | | | |
| T° Storage | | 0°C to 50°C | | | |
| Humidity | | 90% non-condensing | | | |
| MTBF (calc.) | | 55,000 hrs | | | |
Table 2. MT104-100/103Mechanical
*Adapter required. See Table 3, Optional Accessories.
