Altinex MT104-100/103 manual Clr, Test, Fbd

Page 14

MULTI-TASKER™

14. [AUTO] – MT104-100 Only

This command is used to enable or disable the auto-switching feature. In auto-switch mode, the first input with a signal detected will be connected to the output. Use this where only one active source is expected at a time.

CAUTION: Auto-switch mode disables manual control of input selection.

Command Format: [AUTO=xCnUi]

x= Auto Mode (0 = Manual, 1 = Auto) Cn = Card ID (n = # from 1 to max slots)

Ui = Unit ID (i = # from 0 to 9)

Example:

Send the command [AUTO=1C4] to place the MT104-100in slot #4 in auto-switch mode. A status of the card, [C4], will produce feedback similar to the following:

ON 2 AUTO C04

15.[CLR]

This command resets the card configuration to the factory defaults. After the [CLR] command, Input 1 will be selected and ON.

Command Format: [CLRCnUi]

Cn = Card ID (n = # from 1 to max slots)

Ui = Unit ID (i = # from 0 to 9)

Example:

Send the command [CLRC4] to reset the card in slot #4 to its factory defaults. The feedback after sending the status command, [C4], will be as follows:

ON 1 C04

16.[TEST]

This command performs a test on the internal memory. Upon completion, the system will display the results. If there are no problems, the system will display the following:

MEMORY IS GOOD

400-0082-005

13

Otherwise, failures will be indicated.

Command Format: [TESTCnUi]

Cn = Card ID (n = slot # from 1 to max slots)

Ui = Unit ID (i = # from 0 to 9)

Example:

There is an MT104-100in slot #4. In order to test the internal memory, send the command [TESTC4].

17.[FBD]

This command turns feedback delay on or off . It is necessary when installing some newer cards in older systems. If the system does not receive all of the feedback from the card, the card may be communicating too fast. This command will slow down the card's communication rate.

Command Format: [FBDmCnUi]

m= Delay (0= no delay, 1= delay 100mS) Cn = Card ID (n = # from 1 to max slots)

Ui = Unit ID (i = from 0 to 9)

Example:

The command [HELPC4] is sent to the card in slot #4. Some of the HELP file is displayed on the screen, but most is missing. Send the command [FBD1C4] to slow down the rate at which the card sends feedback to the system.

CARD ID COMMANDS

The default Card ID is the same as the card slot number. The next several commands allow the user to change the Card ID to a value other than the slot number.

The ID commands work with all Multi-Tasker™ Front Panel systems. However, front panels that have firmware releases prior to the following will not be able to address Card ID's greater than the number of slots in the system:

13

Page 13 Page 15
Image 14
Page 13 Page 15
Contents MT104-100/103 Troubleshooting Guide Cleaning Precautions / Safety WarningsInstallation GeneralMechanical Technical SpecificationsMT104-100/103 Description of MT104-100 ElectricalApplication Diagrams Diagram 1 Rgbhv ConfigurationDiagram 2 C-VIDEO Configuration Diagram 3 Internal View Operation Installing Your MT104-100Description of Commands RS-232 ControlVER CnS?Cn STAFeedback Option Path OptionExample OFFMULTI-TASKER FBD CLRTest SIDnCi RSISIDn SID+24. WR RSNHelp RMCCLM RMG27. RD STA Menu ModeMenu Command Definitions OFFMain Menu Using Menu ModeMenu Types SUB MenusCurrent Selection this Card Save this SETTING?Menu Mode Examples ESCLED is Blinking RED Troubleshooting GuideLED is not on No Display Limited WARRANTY/RETURN PolicyAltinex Policy

MT104-100/103 specifications

The Altinex MT104-100/103 is a versatile and technologically advanced line of multimedia switchers designed to meet the demands of modern presentation environments. This device enables seamless and efficient management of multiple audio and video sources, making it an ideal solution for conference rooms, classrooms, and other audio-visual settings.

One of the standout features of the MT104-100/103 is its ability to support various input and output configurations. With multiple HDMI, VGA, and audio inputs, it allows for easy connectivity of a wide range of devices, including laptops, projectors, and video conferencing equipment. This flexibility makes it an excellent choice for spaces that require frequent switching between different types of media.

The MT104-100/103 integrates advanced signal processing technologies to ensure high-quality distribution of video and audio signals. Utilizing 4K video resolution capabilities, it ensures that presentations and media display in stunning clarity, supporting the latest high-definition formats. Additionally, the device employs advanced digital signal processing (DSP) to enhance audio quality, providing clear sound across all connected devices.

Another notable characteristic is the user-friendly interface. The MT104-100/103 includes an intuitive control panel that enables quick and easy switching between sources. Furthermore, it can be integrated with existing control systems, offering compatibility with RS-232, TCP/IP, and infrared control for remote management. This makes it adaptable to a variety of environments and user preferences.

Built-in features such as auto-switching and signal sensing optimize performance by automatically detecting which input source is active, simplifying the operator’s workflow. Furthermore, the MT104-100/103 is designed for reliability and resilience, ensuring stable performance during critical presentations.

In terms of physical design, the device boasts a compact and rack-mountable form factor, allowing for easy installation in AV racks or cabinets. The rugged construction guarantees durability, catering to the rigors of frequent use in professional settings.

In summary, the Altinex MT104-100/103 multimedia switcher is a robust and flexible solution tailored for high-performance AV applications. Its array of features, including support for high-resolution video, comprehensive connectivity options, and advanced user experience capabilities, positions it as a top choice for anyone looking to enhance their audio-visual management capabilities.
Top Page Image Contents