MULTI-TASKER™
DIAGRAM 1: RGBHV CONFIGURATION
Use the MT104-100/103card for RGBHV switching. One card is needed for each channel, for a total of 5 Video SW Cards: one card for R, one card for G, one card for B, one card for H and one card for V. Connect IN 1 of the R signal card to the R signal from a laptop, video camera, etc. IN 2 will be connected to the R signal of a Macintosh, document camera, etc. Continue this sequence for each card and signal. Connect the VID OUT of the R signal card to the R signal from the projector. The same applies to the
G, B, H & V signals. Note: to group multiple cards, see the MT100-100user's guide for more information.