Altinex MT104-100/103 manual Ver, CnS

Page 10

MULTI-TASKER™

The Card ID is an assigned value. It is equal to the enclosure slot number in which the card is installed. The value can range from 1 to 4 up to 1 to 20 depending on the enclosure.

Card ID 0 (C0) is used for the controller. See the MT100-100 User’s Guide for details.

The Group ID is a number representing a group of cards defined with the [WR] command. When using the Group ID, all cards in the group will perform the given instruction.

Changing the position of a card will significantly affect the commands recorded on software definitions or third party control systems.

The Unit ID has a value from 0 to 9. Unit ID 0 should be used for single unit operation. If the Unit ID is set to zero, each command may be used without Ui. Use the command [SETU0], as explained in the MT100-100 User’s Guide.

Example:

[VERC3]: For Unit ID Zero

[VERC3Ui]: For Unit ID other than Zero

[VERC3]: Equivalent to [VERC3U0]

1.[VER]

This command receives the software version and card type for the MT104-100/103card.

Command Format: [VERCnUi]

Cn = card ID (n = # from 1 to max slots) Ui = Unit ID (i = # from 0 to 9) Example:

There is one MT104-100/103card is in slot #2 of unit 3. Send the command [VERC2U3], and the Multi-Tasker™ Enclosure will return:

MT104-100 690-0158-004 MT104-100 = card type

690-0158-004 = software version

400-0082-005

9

2.[C]

This command receives the status of the card. Command Format: [CnUi]

Cn = Card ID (n = # from 1 to max slots)

Ui = Unit ID (i = # from 0 to 9)

Example:

There is one MT104-100card in slot #4. Sending the command [C4] to the Multi-Tasker™ will yield the following feedback:

ON 4 C04

 

ON 4

= Output 4 is selected and enabled

C04

= The card is in slot 4

If there is no card in slot #4, sending the [C4] command will not return any feedback.

3.[CnS]

This command saves the current status of the card. This configuration will be restored after system is reset or powered off then on.

Cn = card number (n = #1 to max slots) S = save configuration

If Input 1 is enabled, the feedback after sending the command [C4S], for slot 4, would be:

ON:1 C04 Saved

4.[?]

This command will return general information about the Multi-Tasker™ and cards installed in the unit.

Command Format: [?Ui]

Cn = Card ID (n = # from 1 to max slots)

Ui = Unit ID (i = from 0 to 9)

9

Image 10
Contents MT104-100/103 Troubleshooting Guide Cleaning Precautions / Safety WarningsInstallation GeneralMT104-100/103 Technical SpecificationsMechanical Description of MT104-100 ElectricalApplication Diagrams Diagram 1 Rgbhv ConfigurationDiagram 2 C-VIDEO Configuration Diagram 3 Internal View Operation Installing Your MT104-100Description of Commands RS-232 ControlVER CnS?Cn STAFeedback Option Path OptionExample OFFMULTI-TASKER Test CLRFBD SIDnCi RSISIDn SID+24. WR RSNHelp RMC27. RD RMGCLM STA Menu ModeMenu Command Definitions OFFMain Menu Using Menu ModeMenu Types SUB MenusCurrent Selection this Card Save this SETTING?Menu Mode Examples ESCLED is not on Troubleshooting GuideLED is Blinking RED Altinex Policy Limited WARRANTY/RETURN PolicyNo Display

MT104-100/103 specifications

The Altinex MT104-100/103 is a versatile and technologically advanced line of multimedia switchers designed to meet the demands of modern presentation environments. This device enables seamless and efficient management of multiple audio and video sources, making it an ideal solution for conference rooms, classrooms, and other audio-visual settings.

One of the standout features of the MT104-100/103 is its ability to support various input and output configurations. With multiple HDMI, VGA, and audio inputs, it allows for easy connectivity of a wide range of devices, including laptops, projectors, and video conferencing equipment. This flexibility makes it an excellent choice for spaces that require frequent switching between different types of media.

The MT104-100/103 integrates advanced signal processing technologies to ensure high-quality distribution of video and audio signals. Utilizing 4K video resolution capabilities, it ensures that presentations and media display in stunning clarity, supporting the latest high-definition formats. Additionally, the device employs advanced digital signal processing (DSP) to enhance audio quality, providing clear sound across all connected devices.

Another notable characteristic is the user-friendly interface. The MT104-100/103 includes an intuitive control panel that enables quick and easy switching between sources. Furthermore, it can be integrated with existing control systems, offering compatibility with RS-232, TCP/IP, and infrared control for remote management. This makes it adaptable to a variety of environments and user preferences.

Built-in features such as auto-switching and signal sensing optimize performance by automatically detecting which input source is active, simplifying the operator’s workflow. Furthermore, the MT104-100/103 is designed for reliability and resilience, ensuring stable performance during critical presentations.

In terms of physical design, the device boasts a compact and rack-mountable form factor, allowing for easy installation in AV racks or cabinets. The rugged construction guarantees durability, catering to the rigors of frequent use in professional settings.

In summary, the Altinex MT104-100/103 multimedia switcher is a robust and flexible solution tailored for high-performance AV applications. Its array of features, including support for high-resolution video, comprehensive connectivity options, and advanced user experience capabilities, positions it as a top choice for anyone looking to enhance their audio-visual management capabilities.