| Table 1 System Configuration Commands |
|
|
Menu | Description |
|
|
|
|
System Information | Provides system description, including MIB identifier and other |
| data. |
|
|
Restart Hub | Resets management agent for all hubs in stack or for selected |
| hub. |
|
|
Exit | Exits the configuration program. |
|
|
Configuration Panels |
|
|
|
System Configuration | Configures IP parameters, including address, subnet mask, |
| gateway, SLIP IP, default bootup IP, and maximum number of |
| Telnet sessions. |
|
|
SNMP Configuration | Configures communities and trap managers. |
|
|
Hub Configuration | Displays hardware/firmware versions for hub, isolates/attaches |
| hub's repeater segments, and shows if Agent Module or |
| Internal Switch Module are installed. If Agent Module is |
| installed, shows its bootup option, MAC address and hardware/ |
| firmware versions. If Internal Switch Module is installed, |
| displays its hardware version and shows if enabled/disabled. |
|
|
Port Configuration | Disables/enables any port; sets communication mode to 10 or |
| 100 Mbps, or |
|
|
RMON Configuration | Enables/disables RMON for 10 or 100 Mbps segments, |
| attaches Agent Module to 10 or 100 Mbps segment, and |
| activates full 9 RMON groups for the segment the Agent |
| Module is attached to. |
|
|
TFTP Download | Downloads new firmware version to update Agent Module over |
| the network. |
|
|
XMODEM Download | Downloads new firmware to update Agent Module via a |
| console interface. |
|
|
User Passwords | Sets Administrator and Guest names and passwords used for |
| system access. |
|
|
Console Configuration | Sets console |
| statistics. |
|
|
Statistics Panels |
|
|
|
Repeater Statistics | Displays network performance for 10 and 100 Mbps stack |
| segments. |
|
|
Hub Statistics | Displays network performance for each hub in the stack. |
|
|
Port Statistics | Displays network performance for the selected port. |
|
|
6