Allied Telesis fast ethernet 10/100 hubs manual IP Trap Managers, IP Trap Manager Parameters

Page 16

AT-FH812u and AT-FH824u Software

IP Trap Managers

 

IP Trap Managers

 

IP Address

Community Name

Status

1.

0.0.0.0

public

Disabled

2.

0.0.0.0

public

Disabled

3.

0.0.0.0

public

Disabled

4.

0.0.0.0

public

Disabled

5.

0.0.0.0

public

Disabled

6.

0.0.0.0

public

Disabled

7.

0.0.0.0

public

Disabled

8.

0.0.0.0

public

Disabled

9.

0.0.0.0 public

 

Disabled

10.

0.0.0.0 public

 

Disabled

 

<APPLY>

<OK>

<CANCEL>

 

The IP address of this IP trap manager entry.

<Ctrl-F> forward a char, <Ctrl-B> backward a char.

------------------------------------------------------------

 

 

Figure 7 IP Trap Managers

 

Table 6 IP Trap Manager Parameters

 

 

 

Parameters

 

Description

 

 

 

 

 

 

IP Address

 

IP address of the trap manager.

 

 

 

IP Address of the Trap

 

The community string required for trap management

Manager

 

access (20 characters max).

 

 

 

Status

 

Indicates status of the entry as Enabled or Disabled.

 

 

 

12

Image 16
Contents E R ’ S G U I D E Page Table of Contents Page AT-FH812u and AT-FH824u Software Connecting a Modem Required Connections for System ConfigurationConnecting a VT100 Terminal Making a Telnet Connection Connecting for an In-Band Network Configuring Your System with the Console Interface Using the System Configuration Program Main Menu, System Configuration ProgramMenu Description Statistics PanelsDisplaying System Information Parameter DescriptionPerforming Basic Configuration Resetting SystemLogging Off the System Changing Network Configuration Parameters DescriptionAssigning Snmp Parameters Access maximum of 20 characters AccessSnmp Communities Snmp Communities ParametersIP Trap Managers IP Trap Manager ParametersHub Selection Menu Hub ConfigurationHub ID Hub Configuration Menu Hub Configuration, Including Snmp Agent and Switch ModuleParameters Description Hub Switch ModuleSnmp Agent Configuring Port Parameters Port Administration Status Control Parameters Link StateDefining Port Backups Port Backup Link Control Backup Link Control ParametersDefinition of Port Security Control Parameters Configuring Port SecurityName Description Rmon Configuration Parameters Enable/disable Rmon support for 100 Mbps segmentFull Segment Enable Module, and this option is set to YES, then all 9 RmonDownloading System Software Using the Serial Port to Download via Out-of-Band Configuring Out-of-Band Console Displaying Statistics Changing System PasswordsDisplaying Repeater Statistics Displaying Hub Statistics Device CRC ErrorsDataRateMismatches detected on this device Displaying Port Statistics Port Statistics Port Selection MenuStatistics Description AT-FH812u and AT-FH824u Software