Allied Telesis fast ethernet 10/100 hubs Snmp Communities Parameters, Community Name1, Access

Page 15

SNMP Communities

AT-FH812u and AT-FH824u User’s Guide

SNMP Communities
Community Name		Access		Status
1.	public	READ/WRITE		Enabled
2.	READ-ONLY	Disabled
3.	READ-ONLY	Disabled
4.	READ-ONLY	Disabled
5.	READ-ONLY	Disabled
<APPLY>		<OK>	<CANCEL>

The name of this SNMP community entry.

<Ctrl-F> forward a char, <Ctrl-B> backward a char.

-------------------------------------------------------------------------------------

	Figure 6 SNMP Communities
	Table 5 SNMP Communities Parameters

Parameters	Description


Community Name1	A community string authorized for SNMP or trap management
	access (maximum of 20 characters).

Access	Management access is restricted to Read Only or Read/Write.

Status	Indicates operational status of the community as Enabled or
	Disabled.

1. This hub provides a default community string of “public” with Read/Write access.

11

Image 15

Contents E R ’ S G U I D E Page Table of Contents Page AT-FH812u and AT-FH824u Software Required Connections for System Configuration Connecting a ModemConnecting a VT100 Terminal Making a Telnet Connection Connecting for an In-Band Network Configuring Your System with the Console Interface Main Menu, System Configuration Program Using the System Configuration ProgramStatistics Panels Menu DescriptionParameter Description Displaying System InformationResetting System Performing Basic ConfigurationLogging Off the System Parameters Description Changing Network ConfigurationAssigning Snmp Parameters Snmp Communities Parameters Access maximum of 20 charactersAccess Snmp CommunitiesIP Trap Manager Parameters IP Trap ManagersHub Configuration Hub Selection MenuHub ID Hub Configuration, Including Snmp Agent and Switch Module Hub Configuration MenuSwitch Module Parameters Description HubSnmp Agent Configuring Port Parameters Link State Port Administration Status Control ParametersPort Backup Link Control Backup Link Control Parameters Defining Port BackupsConfiguring Port Security Definition of Port Security Control ParametersName Description Module, and this option is set to YES, then all 9 Rmon Rmon Configuration ParametersEnable/disable Rmon support for 100 Mbps segment Full Segment EnableDownloading System Software Using the Serial Port to Download via Out-of-Band Changing System Passwords Configuring Out-of-Band Console Displaying StatisticsDisplaying Repeater Statistics Device CRC Errors Displaying Hub StatisticsDataRateMismatches detected on this device Port Statistics Port Selection Menu Displaying Port StatisticsStatistics Description AT-FH812u and AT-FH824u Software