Allied Telesis fast ethernet 10/100 hubs manual Hub Configuration Menu

Page 18

AT-FH812u and AT-FH824u Software

Hub

Configuration

Menu

------------------------------------------------------------

		Hub Configuration
Hub ID		: 1			H/W Ver	: 1
Serial No		: 11-00-00-00-10-24		# of Port		: 24
10M BackPlane : Attached
100M BackPlane: Attached
		SNMP Agent
=====================================================
Baudrate	:	9600		H/W Ver	: 1
Bootup Option :		Normal		POST Ver : 0.11
MAC Address	:	00-00-E8-61-1B-C8		System Ver : 0.03
		Switch Module
=====================================================
Type	:	Not-Present
	<APPLY>		<OK>		<CANCEL>
		10M segment backplane isolation status.

Use TAB or Cursor keys to move, <Space> to select.

------------------------------------------------------------

Figure 9 Hub Configuration, Including SNMP Agent and Switch Module

14

Image 18

Contents E R ’ S G U I D E Page Table of Contents Page AT-FH812u and AT-FH824u Software Required Connections for System Configuration Connecting a ModemConnecting a VT100 Terminal Making a Telnet Connection Connecting for an In-Band Network Configuring Your System with the Console Interface Using the System Configuration Program Main Menu, System Configuration ProgramMenu Description Statistics PanelsDisplaying System Information Parameter DescriptionResetting System Performing Basic ConfigurationLogging Off the System Changing Network Configuration Parameters DescriptionAssigning Snmp Parameters Snmp Communities Access maximum of 20 charactersAccess Snmp Communities ParametersIP Trap Managers IP Trap Manager ParametersHub Configuration Hub Selection MenuHub ID Hub Configuration Menu Hub Configuration, Including Snmp Agent and Switch ModuleSwitch Module Parameters Description HubSnmp Agent Configuring Port Parameters Port Administration Status Control Parameters Link StateDefining Port Backups Port Backup Link Control Backup Link Control ParametersConfiguring Port Security Definition of Port Security Control ParametersName Description Full Segment Enable Rmon Configuration ParametersEnable/disable Rmon support for 100 Mbps segment Module, and this option is set to YES, then all 9 RmonDownloading System Software Using the Serial Port to Download via Out-of-Band Configuring Out-of-Band Console Displaying Statistics Changing System PasswordsDisplaying Repeater Statistics Device CRC Errors Displaying Hub StatisticsDataRateMismatches detected on this device Displaying Port Statistics Port Statistics Port Selection MenuStatistics Description AT-FH812u and AT-FH824u Software