Configuring Your System with the Console Interface
Once a direct connection to the serial port or a Telnet connection is established, the login screen for the
FH824U/FH812U
V0.09
User Name : admin
Password : *****
Press <Ctrl+E> to exit this program.
Figure 1 Login Screen for On-Board Configuration Program
When you first log into the configuration program, the default user names are admin and guest and passwords are null. The administrator has Read/Write access to all configuration parameters and statistics. A guest has Read Only access to the management program. Type admin for the user name and press <Enter> for the password to open the Main Menu.
Be sure to define a password, record it and put it in a safe place. To define your password, select User Passwords from the Main Menu and enter a password. Note that passwords can consist of up to 14 alphanumeric characters and are not case sensitive.
Configuration parameters are described in the following section.
Note
A user is allowed three attempts to enter the correct password; on the third failed attempt the current connection is terminated.
4