Allied Telesis AT-9000/28POE manual AT-9000 Series Gigabit Ethernet Switches, AT-9000/12POE Switch

Chapter 1: Overview

AT-9000 Series Gigabit Ethernet Switches

AT-9000/12POE Switch

All of the AT-9000 Managed Layer 2 Gigabit Ethernet Switches include the following features:

RS-232 Console port with RJ-45 connector

Port status LEDs

Low power mode ecoFriendly push-button

Auto MDI/MDI-X on the twisted-pair ports

IEEE 802.3i, 3u, and 3z compliant

IEEE 802.3x flow control in full-duplex operation; back pressure in half-duplex operation and pause frame flow control in full-duplex mode

MAC address table capacity of up to 16K addresses with automatic aging

16MB flash memory with 128MB RAM

Temperature-controlled fan

Compliant with European and China RoHS standards

Features specific to the AT-9000/12POE switch include:

12 port Gigabit Switch with 8 10/100/1000Base-T RJ-45 ports fixed configuration and 4 SFP/RJ-45 ports

PoE and PoE+ supported on the 10/100/1000Base-TX ports

Figure 2 on page 20 illustrates the front- and rear-panel features of the AT-9000/12POE switch.

19