Allied Telesis AT-9000/28POE, AT-9000/12POE manual Powered Device Classes

Page 29

Powered Device Classes

Chapter 1: Overview

Powered devices are grouped into the five classes listed in Table 2. The classes are based on the amount of power the devices require. The switches support all five classes.

Table 2. IEEE Powered Device Classes

Class

Maximum Power Output

PD Power Range

from a Switch Port

 

 

 

 

 

 

 

 

0

15.4W

0.44W to 12.95W

 

 

 

1

4.0W

0.44W to 3.84W

 

 

 

2

7.0W

3.84W to 6.49W

 

 

 

3

15.4W

6.49W to 12.95W

 

 

 

4

30.0W

12.95W to 25.5W

 

 

 

Power Budget The AT-9000/12POE switch has a power budget of 125 watts. The AT-9000/28POE switch has a power budget of 370 watts. These are the maximum amounts of power the switches can provide at one time to the powered devices.

The AT-9000/28POE switch has two power supplies. Each power supply is responsible for providing 185 watts, or half, of the power budget. Both power supplies must be connected to AC power sources for the switch to provide the full 370 watts. The power budget is reduced to 185 watts if only one power supply is connected to a power source.

The power requirements of the PoE devices determine the maximum number of devices the switch can support at one time. So long as the total power requirements of the powered devices is less than the power budget of the switch, the switch can supply power to all of the devices. If the total power requirements exceed the power budget, the switch denies power to one or more ports using port prioritization.

To determine whether the power requirements of the PoE devices you plan to connect to the switch exceed its power budget, refer to the devices’ documentation for their power requirements and add the requirements together. The switch should be able to power all of the devices simultaneously as long as the total is below its power budget. If the total exceeds the available power budget, consider reducing the number of PoE devices so that all of the devices receive power. Otherwise, the switch powers a subset of the devices, based on port prioritization.

29

Image 29
Contents Installation Guide Page Electrical Safety and Emissions Standards Translated Safety Statements Contents Snmp Figures Figures Tables Tables Preface Document Conventions Contacting Allied Telesis AT-9000 Gigabit Ethernet Switch Installation Guide Chapter OverviewAT-9000 Series Models Switch Models and FeaturesRS-232 Console Port Power over EthernetManagement Methods AT-9000/12POE Switch AT-9000 Series Gigabit Ethernet SwitchesAT-9000/12POE Switch Front and Rear Panels SFP/RJ45 AT-9000/28 SwitchAT-9000/28POE Switch Front and Rear Panels AT-9000/28POE SwitchAT-9000/28SP Switch Front and Rear Panels AT-9000/28SP SwitchAT-9000/52 Switch Front and Rear Panels AT-9000/52 Switch10/100/1000Base-T Twisted-Pair Ports Wiring Configuration Maximum Distance 10Mbps 100Mbps 1000Mbps Cable Type Non PoE PoE+ Power Over Ethernet Powered Device Classes Port Prioritization Wiring Implementation 10/100/1000 SFP Slot Base-T Port SFP SlotsOverview Combo Ports Overview Console Port LEDs Mode LED Select ButtonLink LED Mode SFP LINK/ACT LEDs Front Panel ecoFriendly Button EcoFriendly ButtonPower Supplies Power Connectors AT-9000 Gigabit Ethernet Switch Installation Guide Beginning the Installation Installation Procedures Reviewing Safety Precautions AT-9000 Gigabit Ethernet Switch Installation Guide Beginning the Installation AT-9000 Gigabit Ethernet Switch Installation Guide Selecting a Site Unpacking the Switch Installing the Switch on a Table or Rack Installing the Switch on a Table or Desktop Installing the Switch in a Rack Attaching Brackets for Rack Mounting Mounting the Switch in a Rack AT-9000 Gigabit Ethernet Switch Installation Guide Cabling the Networking Ports AT-9000 Gigabit Ethernet Switch Installation Guide Powering On the Switch Connecting the AC Power Cord Applying AC PowerPowering On the Switch Starting a Local Management Session Powering On the Switch Local Management Telnet Management Management MethodsSecure Shell Management Web Browser Management AT-9000 Gigabit Ethernet Switch Installation Guide Adding a Management IP Address Awplus enable Troubleshooting Power LED Is Off Twisted-Pair Port Link LED Is Off AT-9000 Gigabit Ethernet Switch Installation Guide Cannot Establish a Local Out-of-Band Management Session All Port LEDs Are Off Power Over Ethernet Fiber Optic Transceivers Slow Performance Between Switch and Host Device AT-9000 Gigabit Ethernet Switch Installation Guide Appendix a Technical SpecificationsPhysical Specifications Power Specifications Environmental SpecificationsCompliance Standards Safety and Electromagnetic Emissions CertificationsQuality and Reliability Pin Signal 10/100/1000Base-T Twisted-Pair Port ConnectorsConsole Port Pinouts Pin Pair SignalAT-9000 Gigabit Ethernet Switch Installation Guide