Allied Telesis AT-9000/28POE, AT-9000/12POE manual LEDs, Mode LED Select Button

Chapter 1: Overview

LEDs

Here are descriptions of the switch LEDs.

System LEDs

RJ-45 Port LEDs

&MODE LED SELECT Button

There are two system LEDs, the Power (PWR) LED and System (SYS) LED, as shown in Figure 8.

Figure 8. Power and System LEDs

The system LED states are described in Table 4.

Table 4. System LED States

LED	State	Description
Power	Green	System is powered up (power on)
	Off	System is not powered up (power off)
SYS	Green	System is operational

The RJ-45 port LEDs are illustrated in Figure 9.

Link Mode/PoE

Figure 9. RJ-45 Port LEDs

On each port, the left LED indicates the Link status.

Depending on the switch, the right LED indicates the status as follows:

AT-9000/12POE: PoE. The AT-9000/12POE does not have a MODE LED SELECT button.

37