Allied Telesis AT-9000/12POE, AT-9000/28POE manual Unpacking the Switch

AT-9000 Gigabit Ethernet Switch Installation Guide

Unpacking the Switch

To unpack the switch, perform the following procedure:

1. Remove all components from the shipping package.

Note

Store the packaging material in a safe location. You must use the original shipping material if you need to return the unit to Allied Telesis.

2.Place the switch on a level, secure surface.

3.Make sure the following components are included in your switch package. If any item is missing or damaged, contact your Allied Telesis sales representative for assistance.

One AT-9000 Managed Layer 2 GE ecoSwitch

Mounting brackets:

AT-9000/12POE: three brackets - one long bracket and two short brackets

AT-9000/28, AT-9000/28POE, AT-9000/28SP, AT-9000/52: two brackets

Eight flathead Phillips rack-mount bracket screws

AC power cord:

AT-9000/12POE, AT-9000/28, AT-9000/28SP, AT-9000/52: one cord

AT-9000/28POE: two cords

Management cable for local management

52