APC AP9268 manual Connecting your Remote Peripherals, If you are using Remote PS/2 peripherals

Page 10

Basic Installation

Connecting your Remote Peripherals

4.Plug a standard Category 5 Unshielded Twisted Pair cable (up to 500 feet) into the RJ-45 style modular jack on the rear of the APC KVM Switch. APC C5T or APC P5T cable is strongly recommended to achieve best performance and maximum distance. If you use a different Category 5 cable, make sure it is terminated to the EIA (TIA) 568 B standard, commonly used for 10BaseT Ethernet.

5.Route the Category 5 cable to the location where you intend to place the secondary monitor, keyboard and mouse.

6.If you are using Remote PS/2 peripherals

Place the Remote User Receiver near the monitor and connect your monitor, keyboard and mouse to the connectors on the rear of the Remote User Receiver (AP9279) just as you would connect them to your computer. Make sure you

connect your monitor’s power supply to appropriate electrical outlets. (Please

note that the connector on the rear of the Remote User Receiver is not

used in an APC KVM Switch conﬁguration. Do not connect anything to the connector on the rear of the Remote User Receiver.)

5

Image 10

Contents APC KVM Switch For use in the United States EnglishFCC Statement Canadian Department of Communications StatementRack Mount Safety Considerations APC KVM Switch Installer/User Guide Table of Contents Product Overview Feature Overview MultiplatformPlug and play Push-button & keyboard switching CompatibilityBasic Installation Connecting your Local PeripheralsConnecting your Remote Peripherals If you are using Remote PS/2 peripheralsCable Description Length Connecting Computers to the APC KVM Switch APC KVM Switch Installer/User Guide Advanced Install Attaching Multiple Switch UnitsBasic Operations- Overview Keyboard Control ESCKeyboard Switching Key Sequence ActionSystem Control and Maintenance Key Sequence ActionOn-Screen Display Operations Activating OSD APC KVM Switch OSD WindowCommand Menu Basic Channel Maintenance Editing Channel Names and Addresses Deleting an Existing ChannelID Window Setting the ID Window Dwell Time Administrator Functions Differences between Secure and Non-Secure Operating ModesCreating the Administrator Account Setting Up Additional UsersFlash Upgrades Switch SelectionSetup Port Operations Remote UserIndependent Access Advanced Operation- Multiuser OperationShared Access Multi Chassis OperationIndependent Access Options Keyboard Translation PS/2 Keyboard to Sun ComputerAPC KVM Switch Installer/User Guide Channel Scanning Choosing a scan method From the OSD menu Turning Scanning On and OffWith the Scan Button To add a channel to the Scan List Scanning by ListTo delete a channel from the Scan List Power SpeciﬁcationsSpeciﬁcations for Remote User Receiver AP9279 Flash Upgrading Appendices Troubleshooting Try going into command mode again. If APC KVM Switch Installer/User Guide Appendices APC KVM Switch Installer/User Guide If Problems Persist Limited Warranty Life Support Policy General policy Examples of life-support devicesAPC Worldwide Customer Support