APC AP9268 manual Setting the ID Window Dwell Time

Page 25

APC KVM Switch Installer/User Guide

5.Press Enter to accept the changes or press Esc to exit the menu without saving the changes.

Setting the ID Window Dwell Time

This menu selection lets you set the time that the ID Window remains on screen after a channel switch. Each channel can be conﬁgured independently. The default time is set for ﬁve seconds.

1.Highlight the channel you wish to change in the main OSD Window.

2.From the main OSD Window, press the Control key twice to access the Administrator Command Menu.

3.Select ‘Edit Channel’ from the Command Menu.

4.Choose the option ‘ID Dwell Time’.

5.Enter a number between 0-255 seconds. Entering 0 disables the ID Window. Entering 255 allows the ID Window to stay on screen the entire time the channel is active.

20

Image 25

Contents For use in the United States English APC KVM SwitchCanadian Department of Communications Statement FCC StatementRack Mount Safety Considerations APC KVM Switch Installer/User Guide Table of Contents Multiplatform Product Overview Feature OverviewPlug and play Compatibility Push-button & keyboard switchingConnecting your Local Peripherals Basic InstallationIf you are using Remote PS/2 peripherals Connecting your Remote PeripheralsCable Description Length Connecting Computers to the APC KVM Switch APC KVM Switch Installer/User Guide Attaching Multiple Switch Units Advanced InstallBasic Operations- Overview ESC Keyboard ControlKey Sequence Action Keyboard SwitchingKey Sequence Action System Control and MaintenanceOn-Screen Display Operations Activating OSD OSD Window APC KVM SwitchCommand Menu Basic Channel Maintenance Deleting an Existing Channel Editing Channel Names and AddressesID Window Setting the ID Window Dwell Time Differences between Secure and Non-Secure Operating Modes Administrator FunctionsSetting Up Additional Users Creating the Administrator AccountSetup Port Operations Switch SelectionFlash Upgrades Remote UserAdvanced Operation- Multiuser Operation Independent AccessMulti Chassis Operation Shared AccessIndependent Access Options PS/2 Keyboard to Sun Computer Keyboard TranslationAPC KVM Switch Installer/User Guide Channel Scanning Choosing a scan method From the OSD menu Turning Scanning On and OffWith the Scan Button To add a channel to the Scan List Scanning by ListTo delete a channel from the Scan List Speciﬁcations PowerSpeciﬁcations for Remote User Receiver AP9279 Flash Upgrading Appendices Troubleshooting Try going into command mode again. If APC KVM Switch Installer/User Guide Appendices APC KVM Switch Installer/User Guide If Problems Persist Limited Warranty General policy Examples of life-support devices Life Support PolicyAPC Worldwide Customer Support