APC AP9268 manual APC KVM Switch Installer/User Guide

Page 13

APC KVM Switch Installer/User Guide

11.Locate the proper power cord and plug it into the IEC power connector on the APC KVM Switch. Make sure that the power switch is off, then plug the other end of the power cord into an appropriate AC wall outlet. This outlet must be near the equipment and easily accessible to allow for unplugging prior to any servicing of the unit.

12.Power-up your APC KVM Switch unit ﬁrst, then power up all attached computers.

13.If your remote user location utilizes Sun peripherals you will need to set the APC KVM Switch to recognize them before they can be used. To do this:

a.Activate the on-screen display (OSD) by pressing either of the keyboard Control keys twice within one second.

b.Press the Control keys twice more to access Administrator Commands.

c.Use your arrow keys to highlight “Administrator Functions” and press Enter.

d.Highlight and select the “Remote User” menu selection. Use the space bar to cycle through peripheral types and select the ones appropriate to your system. Press Enter to select.

The APC KVM Switch and all attached computers should be powered- down before servicing the unit. Always disconnect the power cord from the wall outlet.

8

Image 13

Contents For use in the United States English APC KVM SwitchCanadian Department of Communications Statement FCC StatementRack Mount Safety Considerations APC KVM Switch Installer/User Guide Table of Contents Multiplatform Product Overview Feature OverviewPlug and play Compatibility Push-button & keyboard switchingConnecting your Local Peripherals Basic InstallationIf you are using Remote PS/2 peripherals Connecting your Remote PeripheralsCable Description Length Connecting Computers to the APC KVM Switch APC KVM Switch Installer/User Guide Attaching Multiple Switch Units Advanced InstallBasic Operations- Overview ESC Keyboard ControlKey Sequence Action Keyboard SwitchingKey Sequence Action System Control and MaintenanceOn-Screen Display Operations Activating OSD OSD Window APC KVM SwitchCommand Menu Basic Channel Maintenance Deleting an Existing Channel Editing Channel Names and AddressesID Window Setting the ID Window Dwell Time Differences between Secure and Non-Secure Operating Modes Administrator FunctionsSetting Up Additional Users Creating the Administrator AccountSetup Port Operations Switch SelectionFlash Upgrades Remote UserAdvanced Operation- Multiuser Operation Independent AccessMulti Chassis Operation Shared AccessIndependent Access Options PS/2 Keyboard to Sun Computer Keyboard TranslationAPC KVM Switch Installer/User Guide Channel Scanning Choosing a scan method From the OSD menu Turning Scanning On and OffWith the Scan Button To add a channel to the Scan List Scanning by ListTo delete a channel from the Scan List Speciﬁcations PowerSpeciﬁcations for Remote User Receiver AP9279 Flash Upgrading Appendices Troubleshooting Try going into command mode again. If APC KVM Switch Installer/User Guide Appendices APC KVM Switch Installer/User Guide If Problems Persist Limited Warranty General policy Examples of life-support devices Life Support PolicyAPC Worldwide Customer Support